지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Ru films were successfully prepared by plasma-enhanced atomic layer deposition (PEALD) using Ru(EtCp)2 and NH3 plasma. To optimize Ru PEALD process, the effect of growth temperature, NH3 plasma power and NH3 plasma time on the growth rate and preferred orientation of the deposited film was systemically investigated. At a growth temperature of 270°C and NH3 plasma power of 100W, the saturated growth rate of 0.038 nm/cycle was obtained on the flat SiO2/Si substrate when the Ru(EtCp)2 and NH3 plasma time was 7 and 10 sec, respectively. When the growth temperature was decreased, however, an increased NH3 plasma time was required to obtain a saturated growth rate of 0.038 nm/cycle. Also, NH3 plasma power higher than 40 W was required to obtain a saturated growth rate of 0.038 nm/cycle even at a growth temperature of 270°C. However, (002) preferred orientation of Ru film was only observed at higher plasma power than 100W. Moreover, the saturation condition obtained on the flat SiO2/Si substrate resulted in poor step coverage of Ru on the trench pattern with an aspect ratio of 8:1, and longer NH3 plasma time improved the step coverage.
목차
등록된 정보가 없습니다.
참고문헌 (17)
참고문헌 신청
이 논문의 저자 정보
최근 본 자료
댓글(0)
0