지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한치과보철학회 The Journal of Advanced of Prosthodontics The Journal of Advanced of Prosthodontics 제10권 제3호
- 발행연도
- 2018.1
- 수록면
- 205 - 210 (6page)
이용수
초록· 키워드
오류제보하기
PURPOSE. The purpose of this study was to evaluate the efficiency of a gas-phase fluorination method under different fluorination periods through using two resin cements. MATERIALS AND METHODS. 84 zirconia specimens in dimensions of 5 mm × 5 mm × 2 mm were prepared and surface treated with 50 μm aluminum oxide particles or gas phase fluorination for 2 min, 5 min, or 10 min. One specimen in each group was surface analyzed under scanning electron microscope. The remaining specimens were bonded to composite cylinders in dimensions of 2 mm diameter and 3 mm high with Panavia SA Plus or Variolink N. Then, the specimens were stored in 37°C distilled water for 24 hours and shear bond strength test was applied at a speed of 1 mm/min. RESULTS. The highest shear bond strength values were observed in the samples fluorinated for 5 minutes and cemented with Panavia SA Plus. Variolink N did not elicit any statistical differences between surface treatments. Panavia SA Plus resin cement and Variolink N resin cements featured statistically significant difference in shear bond strength values only in the case of 5 minutes of fluorination treatment. CONCLUSION. According to the results of this study, application of 5 minutes of fluorination with 10-methacryloyloxydecyl dihydrogen phosphate monomer (MDP) containing Panavia SA Plus resin cement increased the resin bond strength of zirconia. Fluorination of the zirconia surface using conventional resin cement, Variolink N, did not lead to an increase in bond strength.
목차
등록된 정보가 없습니다.
참고문헌 (37)
참고문헌 신청
Han GJ / 2017 / Promotion of resin bonding to dental zirconia ceramic using plasma deposition of tetramethylsilane and benzene / Eur J Oral Sci 125:81~87
Martins AR / 2015 / Improving adhesion between luting cement and zirconia-based ceramic with an alternative surface treatment / Braz Oral Res 29:54
Ahrari F / 2016 / Surface treatment with a fractional CO2 laser enhances shear bond strength of resin cement to zirconia / Laser Ther 25:19~26
Rona N / 2017 / Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding / J Prosthodont Res 61:158~167
Vicente M / 2016 / Influence of cyclic loading on the adhesive effectiveness of resin-zirconia interface after femtosecond laser irradiation and conventional surface treatments / Lasers Surg Med 48:36~44
Martins AR / 2015 / Improving adhesion between luting cement and zirconia-based ceramic with an alternative surface treatment / Braz Oral Res 29:54
Ahrari F / 2016 / Surface treatment with a fractional CO2 laser enhances shear bond strength of resin cement to zirconia / Laser Ther 25:19~26
Rona N / 2017 / Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding / J Prosthodont Res 61:158~167
Vicente M / 2016 / Influence of cyclic loading on the adhesive effectiveness of resin-zirconia interface after femtosecond laser irradiation and conventional surface treatments / Lasers Surg Med 48:36~44
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
The effect of resin cement type and cleaning method on the shear bond strength of resin cements for recementing restorations
The Journal of Advanced of Prosthodontics
2017 .01
-
Effect of the Surface Treatment by Airborne-particle Abrasion on the Shear Bond Strength of Resin Cement to Hybrid Ceramic
대한통합치과학회지
2019 .01
-
지르코니아 표면 처리와 인공타액의 pH에 따른 지르코니아와 레진시멘트의 전단결합강도
대한치과재료학회지
2016 .12
-
The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin
The Journal of Advanced of Prosthodontics
2017 .01
-
Tooth surface treatment strategies for adhesive cementation
The Journal of Advanced of Prosthodontics
2017 .01
-
Simple methods to enhance bond strength of self-adhesive resin cements
Restorative Dentistry and Endodontics
2015 .01
-
Effect of zirconia surface treatment using nitric acid-hydrofluoric acid on the shear bond strengths of resin cements
The Journal of Advanced of Prosthodontics
2017 .01
-
Shear bond strength of zirconia to resin: The effects of specimen preparation and loading procedure
The Journal of Advanced of Prosthodontics
2019 .01
-
Impact of multiple firings and resin cement type on shear bond strength between zirconia and resin cements
The Journal of Advanced of Prosthodontics
2020 .01
-
레진시멘트의 종류와 특성
대한치과의사협회지
2015 .03
-
Effect of cement type on the color attributes of a zirconia ceramic
The Journal of Advanced of Prosthodontics
2016 .01
-
지르코니아 프라이머 종류에 따른 복합레진-지르코니아의 전단결합강도
대한치과기공학회지
2016 .01
-
Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements
Restorative Dentistry and Endodontics
2019 .01
-
Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement
The Journal of Advanced of Prosthodontics
2020 .01
-
In Vitro Study on the Bond Strength Between 3D-Printed Resin and Resin Cement for Pediatric Crown Restoration
대한소아치과학회지
2023 .02
-
Effect of dentin surface roughness on the shear bond strength of resin bonded restorations
The Journal of Advanced of Prosthodontics
2016 .01
-
Evaluation of shear bond strength between dual cure resin cement and zirconia ceramic after thermocycling treatment
The Journal of Advanced of Prosthodontics
2015 .01
-
Effects of Hybrid Coat on shear bond strength of five cements: an in vitro study
The Journal of Advanced of Prosthodontics
2017 .01
-
The Effect of ZrO2 Slurry Application to the Pre-sintered Zirconia Surface on Bonding Strength
대한구강악안면임플란트학회지
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0