지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한치과보철학회 The Journal of Advanced of Prosthodontics The Journal of Advanced of Prosthodontics 제10권 제3호
- 발행연도
- 2018.1
- 수록면
- 197 - 204 (8page)
이용수
초록· 키워드
오류제보하기
PURPOSE. To determine the extent of treatment traces, the roughness depth, and the quantity of titanium nitride (TiN) removed from the surface of CAD/CAM abutments after treatment with various instruments. MATERIALS AND METHODS. Twelve TiN coated CAD/CAM abutments were investigated for an in vitro study. In the test group (9), each abutment surface was subjected twice (150 g vs. 200 g pressure) to standardized treatment in a simulated prophylaxis measure with the following instruments: acrylic scaler, titanium curette, and ultrasonic scaler with steel tip. Three abutments were used as control group. Average surface roughness (Sa) and developed interfacial area ratio (Sdr) of treated and untreated surfaces were measured with a profilometer. The extent of treatment traces were analyzed by scanning electron microscopy. RESULTS. Manipulation with ultrasonic scalers resulted in a significant increase of average surface roughness (Sa, P<.05) and developed interfacial area ratio (Sdr, P<.018). Variable contact pressure did not yield any statistically significant difference on Sa-values for all instruments (P=.8). Ultrasonic treatment resulted in pronounced surface traces and partially detachment of the TiN coating. While titanium curettes caused predominantly moderate treatment traces, no traces or detectable substance removal has been determined after manipulation with acrylic curettes. CONCLUSION. Inappropriate instruments during regular plaque control may have an adverse effect on the integrity of the TiN coating of CAD/CAM abutments. To prevent defects and an increased surface roughness at the transmucosal zone of TiN abutments, only acrylic scaling instruments can be recommended for regular maintenance care.
목차
등록된 정보가 없습니다.
참고문헌 (35)
참고문헌 신청
Sala L / 2017 / Impact of abutment material on peri-implant soft tissue color / Clin Oral Investig 21:2221~2233
Sicilia A / 2015 / Long-term stability of peri-implant tissues after bone or soft tissue augmentation. Effect of zirconia or titanium abutments on peri-implant soft tissues. Summary and consensus statements. The 4th EAO Consensus Conference 2015 / Clin Oral Implants Res 26:148~152
Sailer I / 2007 / Single-tooth implant reconstructions: esthetic factors influ- encing the decision between titanium and zirconia abutments in anterior regions / Eur J Esthet Dent 2:296~310
Lops D / 2015 / Soft tissues stability of cad-cam and stock abut- ments in anterior regions: 2-year prospective multicentric co- hort study / Clin Oral Implants Res 26:1436~1442
Park SE / 2007 / Optical phenomenon of peri-implant soft tissue. Part I. Spectrophotometric assessment of natural tooth gingiva and peri-implant mucosa / Clin Oral Implants Res 18:569~574
Sicilia A / 2015 / Long-term stability of peri-implant tissues after bone or soft tissue augmentation. Effect of zirconia or titanium abutments on peri-implant soft tissues. Summary and consensus statements. The 4th EAO Consensus Conference 2015 / Clin Oral Implants Res 26:148~152
Sailer I / 2007 / Single-tooth implant reconstructions: esthetic factors influ- encing the decision between titanium and zirconia abutments in anterior regions / Eur J Esthet Dent 2:296~310
Lops D / 2015 / Soft tissues stability of cad-cam and stock abut- ments in anterior regions: 2-year prospective multicentric co- hort study / Clin Oral Implants Res 26:1436~1442
Park SE / 2007 / Optical phenomenon of peri-implant soft tissue. Part I. Spectrophotometric assessment of natural tooth gingiva and peri-implant mucosa / Clin Oral Implants Res 18:569~574
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microscopical and chemical surface characterization of CAD/CAM zircona abutments after different cleaning procedures. A qualitative analysis
The Journal of Advanced of Prosthodontics
2015 .01
-
Comparison of CAD/CAM abutment and prefabricated abutment in Morse taper internal type implant after cyclic loading: Axial displacement, removal torque, and tensile removal force
The Journal of Advanced of Prosthodontics
2019 .01
-
임플란트 보철 치료에서 지대주 선택시 고려사항과 임상적 적용
대한치과의사협회지
2016 .03
-
CAD/CAM 티타늄 맞춤 지대주로 수복한 구치부 임플란트에서의 기계적 합병증에 대한 후향적 연구
대한구강악안면임플란트학회지
2019 .01
-
CAD-CAM 맞춤 지대주 제작 시 고려사항: I. 환봉선택 및 제작과정을 중심으로
대한구강악안면임플란트학회지
2019 .01
-
심미가 중요시되는 임플란트 치료시 타이타늄 링크 - 캐드캠 지르코니아 지대주 사용의 임상적 고려
대한치과의사협회지
2016 .02
-
A Study of mechanical properties of oxide layer removed Co-Cr-Mo abutments
대한치과의사협회지
2015 .11
-
Healing abutment case를 이용한 healing abutment의 효과적인 세척에 관한 연구
대한치과보철학회지
2022 .01
-
Micro-CT를 이용한 맞춤형 CAD-CAM 지대주의 적합성 분석
대한치과보철학회지
2016 .01
-
Physical and mechanical changes on titanium base of three different types of hybrid abutment after cyclic loading
The Journal of Advanced of Prosthodontics
2023 .02
-
CAD/CAM 기법과 프레스 기법으로 제작된 코어의 적합도 평가
대한치과재료학회지
2016 .12
-
CAD/CAM으로 제작된 임플란트 맞춤형 지대주의 방사선학적 평가
대한치과보철학회지
2017 .07
-
치과기공 CAD/CAM 사용에 대한 실태변화
대한치과기공학회지
2015 .01
-
Clinical reliability of zirconium abutment in implant restorations in the English and Korean literature
Maxillofacial Plastic Reconstructive Surgery
2018 .09
-
CAD/CAM 전문 인력 양성을 위한 교육 및 업무의 필요성
대한치과기공학회지
2016 .01
-
Pull-off resistance of a screwless implant-abutment connection and surface evaluation after cyclic loading
The Journal of Advanced of Prosthodontics
2021 .01
-
Evaluation of the reproducibility of various abutments using a blue light model scanner
The Journal of Advanced of Prosthodontics
2018 .01
-
Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations
The Journal of Advanced of Prosthodontics
2019 .01
-
연조직 이식술과 넓은 computer aided design/computer aided mamufacturing 지대주를 이용한 임플란트 고정성 보철물의 출현윤곽 재현
구강회복응용과학지
2015 .12
-
생물학적, 기계적 관점에서 바라본 지대주에 의한 임플란트의 실패
구강회복응용과학지
2025 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0