메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Four iron-ore sintering furnaces, thirteen steel melting furnaces, and three alloy melting furnaces were selected from eighteen plants in iron-and-steel foundries. PCDDs/PCDFs samplings were achieved two times at the stacks of each furnace. The emission levels of PCDDs/PCDFs were 0.615 ng-TEQ/Sm3 in iron-ore sintering, 0.097 ng-TEQ/Sm3 steel-melting, and 0.024 ng-TEQ/Sm3 in alloy-melting processes on average. PCDFs showed an approximately four times higher concentrations than PCDDs, revealing that the ratio of PCDDs to PCDFs averaged approximately 20:80. The main contributor to total TEQs was 2,3,4,7,8-PeCDF, and its TEQ value was in the range of 44% to 52% of total TEQs. Electric furnaces have released slightly lower levels of PCDDs/PCDFs than sintering furnaces. But, the emission amounts of off-gas from electric furnace were up to about 1.5 millions standard cubic meters per hour, depending on the numbers of electric furnace in a plant. This is mainly due to sequence-batch operation of electric furnace, and thus the building is totally enclosed in order to minimize dust and gaseous emissions. Accordingly, off-gases contain very high concentration of oxygen (20.5%) and carbon monoxide (410 ppm) on average.

목차

등록된 정보가 없습니다.

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0