메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
임흥빈 (충북대학교) 이경호 (한국에너지기술연구원) 공민석 (한국에너지기술연구원) 서동현 (충북대학교)
저널정보
한국건축친환경설비학회 한국건축친환경설비학회 논문집 한국건축친환경설비학회 논문집 제13권 제4호
발행연도
2019.8
수록면
234 - 245 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper demonstrates a calibration methodology for adjusting model parameters and factors using assistant tools - python and GenOpt. In this study, a building simulation model is developed for a demonstration building for a low-energy solar house. The model is composed of a 3D model describing building architecture and HVAC system model using TRNSYS simulation program. In this study, model calibration methodology consists of two phases in order to improve the accuracy of building energy model and reduce errors of simulation results: Parameter adjustment phase and factor optimization phase. Trial and error approach is used for the first phase and GenOpt tool is employed for the second phase to improve the model performance. Based on American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE) Guideline 14 indices, the performance of the calibrated building simulation model is evaluated to obtain Normalized Mean Bias Error (NMBE)<SUB>hourly</SUB>, values within ±10% and Coefficient Variation of Root Mean Square Error (CV (RMSE))<SUB>hourly</SUB>, values within 30%. The performance indices are calculated with simulated and measured temperatures of each indoor zone and buffer tank. Daily data is used for calibrating heat pump (HP) electrical energy consumption because it is hard to fit the operating time of HP which can be different to time that heating load occurs. As a result of the calibration process, it is found that the values of NMBE<SUB>hourly </SUB>and CV (RMSE)<SUB>hourly</SUB> achieves within followings: Average indoor temperature - NMBE<SUB>hourly</SUB> is 1.2% and CV (RMSE)<SUB>hourly</SUB> is 2.2%. Buffer tank temperature NMBE<SUB>hourly</SUB> is 1.5% and CV (RMSE)<SUB>hourly</SUB> is 8.2%. And the value of NMBE<SUB>daily</SUB> and CV (RMSE)<SUB>daily</SUB> are used for HP electrical use as following: NMBE<SUB>daily</SUB> is 9.5%, CV (RMSE) is 23.4%.

목차

ABSTRACT
서론
시뮬레이션 모델 성능지표 및 캘리브레이션 선행연구
적용 대상 건물 및 시뮬레이션 모델링
모델 캘리브레이션 방법
결론 및 향후 연구 계획
References

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-546-000970341