메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김학민 (고려대학교) 심준혁 (고려대학교) 정상열 (고려대학교) 홍대희 (고려대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.36 No.9
발행연도
2019.9
수록면
859 - 865 (7page)
DOI
10.7736/KSPE.2019.36.9.859

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
It is possible to produce irregular structures quickly and accurately using rapid prototyping technology. However, there are still some obstacles in fabricating large-scale structures. In order to overcome these technical hitches, equipment has been developed for manufacturing irregular structures using EPS, making it an easy process. Conventional laser cutting systems can produce undesirable slopes in the structure when cutting EPS due to the divergence of the laser beam, resulting in step differences in the overall shape. Therefore, the objective of this study was to reduce the divergence of the laser beam using a concave lens and to find the optimal cutting conditions of the EPS through cutting experiments. As a result of the study, it was confirmed that the collimated beam cutting system can reduce the cutting slopes compared to the focused beam cutting system. In addition, experimental equations for depth of cut with cutting speed and laser intensity were derived.

목차

1. 서론
2. CO₂ 레이저 빔의 특징
3. 평행 레이저 빔 출력 장치
4. EPS 폼 절단 실험
5. 실험 결과 및 고찰
6. 결론
REFERENCES

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-555-000968131