지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
In the designs of the sensitive electronic devices such as phase sensitive detector, X-ray diffractometer, and neutron diffractometers, we must take into account the geometrical factors in a coil systems and extraneous stray fields. Input wave forms in such a sensitive electronic devices are often altered by the influence of these factors. Since the magnitude of the stray fields is generally very small, this affection may be removed by applying a good shielding but it is not ease to remove the affection from a geometrical factor. This affection must be however calculated by the theoretical methods and analytical solution in the equation of these factors. The fundamental purpose of this paper lie in the theoretical calculations and practical measurements of the geometrical factor in the coil systems, finite solenoid, and four point prove. In the heoretical calculations, the geometrical factors in the coil systems were calculated by applying the elliptic functions and in the contact points were calculated by applying the elliptic functions and in the contact points were calculated by applying the eigen functions and the infinite series. The measurements were carried out by using the sensitive electronic device made from author's design, as shown in the Fig. 9. The result of this work has verified the essential correctness of theoretical investigations and measuring techniques of geometrical factors on the design of sensitive electronic devices. It also has several advantages such that: (1) all the data obtained may give effective data to designer to work on the field of sensitive electronic devices or microelectronic devices, (2) it has evidently explained the characteristics of electrical investigations and physical definition, and has removed the conventional error of geometrical factors in the coil systems and contact points.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
기하학적 건축구성에 관한 연구 ( A Basic Study on the Geometrical composition of Architecture )
대한건축학회 학술발표대회 논문집 - 계획계
1986 .10
-
Simulation Study of Geometrical Effects on Electrical Characteristics of Field Emitter Device
Journal of Electrical Engineering and information Science
2000 .06
-
Ka 가 큰 원통에서의 Geometrical wave 관찰
한국음향학회 학술발표대회
1985 .01
-
Improved Geometrical Learning Algorithm in Binary Field
ICONIP : International Conference On Neural Information Processing
1994 .01
-
Polymers in Electronic Device
한국고분자학회 학술대회 연구논문 초록집
2014 .10
-
Determination of the Geometrical Factors and the Filling Factor of Superconductive Dielectric Resonators Using Computer Simulations
한국초전도학회 학술대회
2009 .01
-
STUDY REGARDING THE INFLUENCE OF GEOMETRICAL PARAMETERS DURING THE INCREMENTAL FORMING PROCESS
기타자료
2008 .09
-
Experimental equipment for Education of Geometrical Tolerances
대한기계학회 춘추학술대회
2012 .06
-
RECENT DEVELOPMENT IN ELECTRONIC MATERIALS FOR DEVICES
대한전자공학회 학술대회
1972 .01
-
기하학적 형태를 갖는 옥상녹화 시스템의 열성능에 관한 실험적 연구
한국태양에너지학회 학술대회논문집
2002 .05
-
공구접근 경로가 밀링 가공된 원통 구멍 형상에 미치는 영향
한국기계가공학회지
2004 .12
-
입ㆍ출력변위비를 고려한 컴플라이언트 메커니즘 설계
대한기계학회 논문집 A권
2003 .05
-
A Simple Design of Highly Sensitive RF Coils for the Human 7.0 T MRI System
정보 및 제어 논문집
2015 .10
-
TNF 방식에 의한 광섬유의 기하학적 구조 측정 ( Measurement of Geometrical Characteristics of Optical Fiber by Transmitted Near Field Technique )
대한전자공학회 학술대회
1984 .01
-
TNF 방식에 의한 광섬유의 기하학적 구조 측정
대한전자공학회 학술대회
1984 .11
-
스크류레오미터의 기하학적 보정계수에 관한 연구
제어로봇시스템학회 각 지부별 자료집
2013 .12
-
패턴 인식과 관련한 특성들의 고찰 ( A Study of Some Geometrical Features Related to Pattern Recognition )
한국통신학회 워크샵
1990 .01
-
Theoretical study of geometrical and electronic structures of polycyclopenta [ 2,1- b - 3,4- b' ] dithiophene and its analogs
한국고분자학회 학술대회 연구논문 초록집
1996 .04
-
기하학적 비선형성이 구조시험에 주는 영향
대한기계학회 춘추학술대회
2017 .04
-
농산물 및 미립자의 기하학적 특성 분석을 위한 컴퓨터 시각 시스템(II) -기하학적 특성 분석 알고리즘-
바이오시스템공학(구 한국농업기계학회지)
1992 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-560-000731124