발사체 공압밸브의 경우 밸브 개폐 시 유로의 급격한 압력 증가의 위험을 방지하기 위하여 개폐속도를 조절할 필요가 있다. 공압 구동라인에 오리피스를 설치하여 밸브구동압의 증가속도를 변화시킬 경우 밸브 개폐속도를 조절할 수 있다. 오리피스 직경 0.4, 0.6, 0.8 mm에 대하여 공압밸브의 개폐속도를 측정하였다. 공압밸브의 열림 시간과 닫힘 시간을 각각 0.1 s와 4 s 이하로 조정할 수 있었다.
In case of pneumatic valves for launch vehicle, the velocity of opening and closing should be controlled in order to prevent against rapid pressure increase in flow line at either valve opening or closing. The velocity of valve opening and closing can be controlled by changing the velocity of valve operation pressure increment with the orifice in the pilot line. We have measured the opening and closing velocity of pneumatic valve with respect to variable orifice diameters, such as 0.4, 0.6, and 0.8 mm. We could adjust the opening and closing time of pneumatic valve below 0.1 s and 4 s, respectively.