메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Mohammad Hossein Saghafi (Ferdowsi University of Mashhad) Hashem Shariatmadar (Ferdowsi University of Mashhad) Ali Kheyroddin (Semnan University)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.13 No.1
발행연도
2019.1
수록면
63 - 82 (20page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to investigate and evaluate the feasibility of using high-performance fiber-reinforced cement composites (HPFRCC) to satisfy the requirement of transverse reinforcement in beam-column joint under seismic loads. The basic mechanical properties of the HPFRCCs are determined by compression, uniaxial tension, and direct shear tests. Four half-scale exterior beam-column connections are cast and tested under cyclic loads. The cracking patterns, hysteresis behavior, ductility, energy dissipation with damping characteristics and joint shear capacity of the HPFRCC beam-column connections are analyzed, investigated, and compared to the cyclic responses of normal concrete connections designed with/without seismic criteria of ACI. The test results revealed that HPFRCC connections considerably enhances shear and flexural capacity and also improved the deformation and damage tolerance behavior in post-cracking stage comparing to normal concrete connections in ultimate stages. Also, the failure mode of HPFRCC specimens changed from shear mode to flexural mode comparing to the connections without seismic details. Severe damages are observed in normal concrete connection designed without considering seismic criteria. Wide diagonal cracking and damage are observed on the designed NC connections under large cyclic displacement at drift 6%. However, in HPFRCC connections, joint remained intact without any cracks and damage until the test end. This implies that the shear stress requirement can be satisfied without any need to the transverse reinforcement in the HPFRCC joint.

목차

Abstract
1. Introduction
2. Preparation of HPFRCC Mixtures
3. The Experimental Program
4. Results and Discussion
5. Conclusion
References

참고문헌 (39)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0