메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
최현훈 (고려대학교) 우루노유미 (고려대학교) 김상호 (고려대학교) 정재원 (고려대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2018년도 학술대회
발행연도
2018.12
수록면
2,401 - 2,405 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to remove dissolved oxygen and carbon dioxide from feedwater in power generation facilities, boilers and incinerators, deaerators are essential. In actual deaerator, temperature of spray is about 145°C and the surrounding temperature is about 177°C (steam temperature). It is necessary to analyze the temperature in order to improve the efficiency of deaerator. In this paper, splashed fraction and jet breakup according to the distance from nozzle were studied. Also, Liquid film shapes on the vertical wall are visualized and analyzed using highspeed camera. These were obtained at different temperature respectively. As temperature increases, ξ(splashed fraction) becomes smaller overall. Also, the value of ξ<SUB>max</SUB>(maximum of splashed fraction) decreases as the temperature increases. The Rayleigh regime, the first wind-induced regime, and the second wind-induced regime were confirmed by jet breakup images. The phenomenon that 𝜉<SUB>max</SUB> decreased with increasing temperature was visualized and confirmed. It was confirmed that the diameter of the liquid film becomes larger as the temperature rises. That is, ξ decreases because droplets spread on the wall and the thickness of the liquid film becomes thinner. Therefore, when the temperature of water rises, ξ decreases. The results of this paper are used to increase the efficiency of actual deaerator and provide data for design and optimization.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0