메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Ji-Yong Um (Hannam University)
저널정보
대한전자공학회 IEIE Transactions on Smart Processing & Computing IEIE Transactions on Smart Processing & Computing Vol.7 No.6
발행연도
2018.12
수록면
448 - 456 (9page)
DOI
10.5573/IEIESPC.2018.7.6.448

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper proposes an ultrasound transceiver beamformer (BF) and a delay-control scheme for a finger vein-pattern sensor based on a two-dimensional (2D) transducer array. To facilitate sequential volume scanning without intermittent acquisition of delay information through external interface, delay encoding schemes for each transmitter (TX) and receiver (RX) BF are proposed. Both delay encoding schemes are based on an initialization of on-chip memory. With this delay-encoding scheme and its controller, both TX beamforming and dynamic RX beamforming can be performed sequentially for a 20 x 20 2D array. A TX BF and a RX-BF controller using onchip memory are implemented using register transfer level Verilog. Also, a delay-decoding circuit, which is based on a shift register, is implemented at the transistor level. Through RTL simulation, a sequential focusing operation of TX BF and a delay-encoding result of RX BF are illustrated. Also, a mixed-signal simulation for the BF controller along with the RX BF is performed to show a dynamic RX beamforming operation. A chip incorporating proposed TX BF and BF controller is implemented using a 180-nm (bipolar-CMOS-DMOS) BCD process. In simulation results, achieved power and active area per channel are 0.24 mW and 0.22㎟, respectively.

목차

Abstract
1. Introduction
2. Architecture of ASIC
3. Circuit Implementation
4. Simulation Results
5. Conclusion
References

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-569-000333354