메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김동호 (서울과학기술대학교) 옥승민 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2018년도 동계학술발표대회 논문집
발행연도
2018.11
수록면
476 - 479 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An experimental study was performed to measure the flow boiling heat transfer coefficient and pressure drop in multi-ported square channels with 0.5 mm hydraulic diameter. The working fluid was selected as HFE-7100 because of its dielectric fluid characteristics and low saturation pressure. The test section was made of one piece of brass block with carved plenums and mini-channels. In the test section, heat transfer and pressure drop were measured under the conditions at 300 ㎏/㎡s of mass flux, 63℃of saturation temperature, 15 ㎾/㎡ of heat flux, and the vapor quality from 0.3 to 0.55. The measured heat transfer coefficients decreased with the increase of vapor quality and the reason of this trend was estimated as the effect of the early dryout on the channel surface. The measured heat transfer coefficients were compared with the predicted values by several existing correlations and one of the compared correlations showed relatively good agreement including the decreasing trend of heat transfer coefficients with the increase of vapor quality.

목차

Abstract
1. 연구 배경 및 목적
2. 실험장치 및 검증
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-553-000209066