메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김태원 (중앙대학교) 양영권 (중앙대학교) 김환식 (유원대학교) 박진철 (중앙대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제30권 제11호
발행연도
2018.11
수록면
497 - 507 (11page)
DOI
10.6110/KJACR.2018.30.11.497

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (7)

초록· 키워드

오류제보하기
This study represent an experimental study of PCM floor radiant heating system. The results obtained from the study are summarized as follows; 1) PCM floor radiant heating system is an insertion of a 10 mm thick PCM into the existing standard floor structure, which has the advantage of good construct ability due to no additional process. 2) It was confirmed that the PCM thread remains higher than the normal room. In particular, it was found that the temperature of hot water pipes under the pipes was maintained at 36℃ or higher after four hours after the boiler was stopped. Therefore, we have seen that the room temperature of the PCM floor radiant heating system is longer than the general floor heating system, PCM Floor Radiant Heating is considered to improve the comfort of indoor residents.

목차

Abstract
1. 연구배경 및 목적
2. 표준바닥구조와 온수난방공법구조
3. 선행연구 분석 및 Mock-up 실험동 구축
4. 실험 결과
5. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0