메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국강구조학회 한국강구조학회지 한국강구조학회지 제6권 제3호
발행연도
1994.9
수록면
117 - 125 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
TS(abridged from Torque-Shear) bolts are originaly developed for the purpose of quality assurance in clamping force by means of fracture mechanism due to the stress concentration around the V-type notch at the bolt tip. In the control of tightening a bolt, torque factor as well as geometries of the notch (diameter, angle and roundness) are of prime importance to assure the quality of the joint performance in a structure. Some theoretical aspects of fastening torque and clamping force in a TS bolt are examined with focus on the friction coefficients. A simple relationship between face friction coefficient and thread friction one is derived, and numerical calculations and plots based on the experimental data are presented, which may be used as a complementary guide in a situation to cope with torque factor degradation. It is found that the interaction between friction torque on the thread and the tensile force developed in a bolt leads to an elliptic stress space. The upper limit of thread friction coefficient μ_s and the lower limit of face friction coefficient μ_w are derived and plotted against the axial force ratio.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-053-003650748