메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이지영 (경상대학교) 김철환 (경상대학교) 조해민 (경상대학교) 박태웅 (경상대학교) 김경민 (경상대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제50권 제2호(통권 제181호)
발행연도
2018.4
수록면
52 - 59 (8page)
DOI
10.7584/JKTAPPI.2018.04.50.2.52

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (10)

초록· 키워드

오류제보하기
Previous researches have shown that mechanical and chemical treatments can be used to detach fluorescent whitening agents (FWAs) from recycled fibers, and that FWAs remain soluble in the process water. Because FWAs are soluble in the process water they have a tendency to adsorb on the cellulosic fibers in the papermaking process, the detached FWAs must be removed. In this study, coagulants, including poly-DADMAC and polyethylenimine (PEI), were applied to the FWA solutions to make the FWA molecules undergo flocculation and to induce the complete sedimentation of the flocs. The turbidity of the FWA solutions was measured to identify the formation of the FWA flocs, and the fluorescence emissions of the supernatant of the FWA solutions were analyzed after the sedimentation of the FWA flocs was completed. When the coagulants were added to the FWA solutions, the turbidity increased, which indicated the formation of FWA flocs. The fluorescence emission decreased dramatically after the sedimentation of the flocs was completed. Through these experiments, we concluded that poly-DADMAC was more effective than PEI at removing the FWAs from solution. However, the dosage of the coagulants should be determined based on the type of FWAs and coagulants being used.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-586-002101739