Inducer Design to Avoid Cavitation Instabilities

Kang, Dong-Hyuk; Watanabe, Toshifumi; Yonezawa, Koichi; Horiguchi, Hironori; Kawata, Yutaka; Tsujimoto, Yoshinobu

doi:http://dx.doi.org/10.5293/IJFMS.2009.2.4.439

추천

검색

질문

자료유형: 학술저널

저자정보: Kang, Dong-Hyuk Watanabe, Toshifumi Yonezawa, Koichi Horiguchi, Hironori Kawata, Yutaka Tsujimoto, Yoshinobu

저널정보: 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.2 No.4

발행연도: 2009.12

수록면: 439 - 448 (10page)

DOI: http://dx.doi.org/10.5293/IJFMS.2009.2.4.439

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

Three inducers were designed to avoid cavitation instabilities. This was accomplished by avoiding the interaction of tip cavity with the leading edge of the next blade. The first one was designed with extremely larger leading edge sweep, the second and third ones were designed with smaller incidence angle by reducing the inlet blade angle or increasing the design flow rate, respectively. The inducer with larger design flow rate has larger outlet blade angle to obtain sufficient pressure rise. The inducer with larger sweep could suppress the cavitation instabilities in higher flow rates more than 95% of design flow coefficient, owing to weaker tip leakage vortex cavity with stronger disturbance by backflow vortices. The inducer with larger outlet blade angle could avoid the cavitation instabilities at higher flow rates, owing to the extension of the tip cavity along the suction surface of the blade. The inducer with smaller inlet blade angle could avoid the cavitation instabilities at higher flow rates, owing to the occurrence of the cavity first in the blade passage and its extension upstream. The cavity shape and suction performance were reasonably simulated by three dimensional CFD computations under the steady cavitating condition, except for the backflow vortex cavity. The difference in the growth of cavity for each inducer is explained from the difference of the pressure distribution on the suction side of the blades.

#Inducer #Tip cavity #Cavitation instability #CFD computation

참고문헌 (0)

참고문헌 신청

참고문헌이 DBpia에서 서비스 중이라면, [참고문헌 신청]을 통해 등록해보세요

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!