메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
문준오 (한국기계연구원) 하헌영 (한국기계연구원) 이태호 (한국기계연구원)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第35卷 第4號
발행연도
2017.8
수록면
51 - 57 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Microstructure evolution and corrosion behavior in the simulated HAZ and real welds of high interstitial alloyed austenitic stainless steels were investigated. Three Fe-18Cr-10Mn-N-C alloys with different N and C contents were fabricated using a commercial pressurized vacuum-induction melting furnace. First, the HAZ samples with three different peak temperatures were experimentally simulated using Gleeble simulator under welding condition of 30kJ/cm heat input. In the HAZs, δ-ferrite was formed and its fraction increased with increase in the peak temperature. The electrochemical tests indicated that pitting corrosion resistance significantly decreased by the formation of δ-ferrite, however did not changed with increasing δ-ferrite fraction. Next, the samples for real welds evaluation were prepared by autogeneous welding. The corrosion behavior in real welds was good agreement with that in Gleeble-simulated HAZ. Cross sectional microstructure of real welds indicated that δ-ferrite was formed in the HAZ and thus pitting corrosion selectively occurred at δ-ferrite/austenite phase boundaries in the HAZ.

목차

Abstract
1. 서론
2. 실험 방법
3. 실험 결과 및 고찰
4. 결론
Acknowledgement
References

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0