메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최승원 (강원대학교) 김형진 (강원대학교) 장웅기 (강원대학교) 서영호 (강원대학교) 김병희 (강원대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.34 No.7
발행연도
2017.7
수록면
501 - 505 (5page)
DOI
10.7736/KSPE.2017.34.7.501

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents a construction method regarding a tubular nano-mesh for which the anodic oxidation of aluminum (Al) wire is used. The first step of tubular-nano-mesh production is Al-wire anodization. A new anodizing device was made for the wire-based uniform anodization for this study, and a high-purity (99.999%) Al wire with a 2 mm diameter was used. Also, an electrolytic solution was used as a 0.07 M oxalic acid, while the electrolytic-solution temperature was maintained at -3℃. While the applied voltage and the process time were varied, the AAO (Anodic Aluminum Oxide) characteristics of the Al wire were observed. When 60 V was applied to the wire, alumina cracks were not evident, whereas the application of 100 V produced alumina cracks; this is because the growth rate of the nano-pore voltage affected the alumina shape. For the subsequent construction of the tubular alumina structure, an Al-etchant (HCl + H2O + CuCl2 + 2H2O) etched-Al portion of the anodized wire was employed. The final step is a pore-widening process that is implemented through the hole channel. The anodized wire was dipped in the alumina etchant, and the pore-wall removal was checked over time.

목차

1. 서론
2. 튜브형 나노매쉬 제작을 위한 알루미늄 와이어 양극산화 공정 조건 수립
3. 튜브형 나노매쉬 제작
4. 결론
REFERENCES

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-555-001020805