메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
M. Haddadi (University of Isfahan) M. Mozaffari (University of Isfahan) J. Amighian (University of Isfahan)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.22 No.2
발행연도
2017.6
수록면
169 - 174 (6page)
DOI
10.4283/JMAG.2017.22.2.169

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this work, lithium ferrite (Li<SUB>0.5</SUB>Fe<SUB>2.5</SUB>O₄) nanoparticles were prepared via mechanochemical processing and subsequent heat treatment at a relatively low (600 ℃) calcining temperature. The raw materials used were high purity Fe₂O₃ and Li₂CO₃ that were milled for between 2 and 20 h. The milled powders were then calcined at temperatures of 500 and 600 ℃ for 5 h in air. XRD results show that optimum conditions to obtain single phase lithium ferrite nanoparticles with a mean crystallite size of about 23 ㎚, using Scherrer’s formula, are 10 h milling and calcination at 600 ℃. Saturation magnetization and coercivity of the single phase Li ferrite nanoparticles are 44.6 emu/g and 100 Oe respectively, which are both smaller than those of the bulk Li ferrite. The Curie temperature of the single sample was determined by a Faraday balance, which is 578 ℃ and smaller than that of bulk Li ferrite.

목차

1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusions
References

참고문헌 (32)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0