지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.11 No.2
- 발행연도
- 2017.6
- 수록면
- 377 - 389 (13page)
이용수
초록· 키워드
오류제보하기
Tests of the lateral and torsional stability are quite sensitive to the experimental conditions, such as support conditions and loading system. Controlling all of these conditions in a full-size test is a very challenging task. Therefore, in this paper, an experimental measurement method that can control the experimental conditions using a small-scale model was proposed to evaluate the lateral and torsional stability of beams. For this, a loading system was provided to maintain the vertical direction of the load applied to the beam, and a support frame was produced to satisfy the in-plane and out-of-plane support conditions. The experimental method using a small-scale model was applied successively to the lateral and torsional behavior and stability of I-shaped beams. The proposed experimental methods, which effectively accommodate the changes in the geometry and length of the beam, could contribute to further experimental studies regarding the lateral and torsional stability of flexural members.
목차
Abstract
1. Introduction
2. Objectives and Significance
3. Experimental Program
4. Experimental Measurement
5. Experimental Results and Discussion
6. Conclusions
References
참고문헌 (43)
참고문헌 신청
Brsoum, R. S., & Gallagher, R. H. (1970). Finite element analysis of torsional and torsional flexural stability problems. International Journal for Numerical Methods in Engineering, 2(3), 335?352.
Chen, W. F., & Lui, E. M. (1987). Structural Stability: Theory and Implementation (pp. 317?333). New York: Elsevier.
Darılmaz, K. (2011). An assumed stress hybrid finite element for buckling analysis. Mathematical and Computational Applications, 16(2), 690?701.
DIANA. (2016). TNO DIANA-finite element analysis user’s manual release 10.1. Delft, The Netherlands: TNO.
Fafard, M., Beaulieu, D., & Dhatt, G. (1987). Buckling of thinwalled members by finite elements. Computers & Structures, 25(2), 183?190.
Darılmaz, K. (2011). An assumed stress hybrid finite element for buckling analysis. Mathematical and Computational Applications, 16(2), 690?701.
DIANA. (2016). TNO DIANA-finite element analysis user’s manual release 10.1. Delft, The Netherlands: TNO.
Fafard, M., Beaulieu, D., & Dhatt, G. (1987). Buckling of thinwalled members by finite elements. Computers & Structures, 25(2), 183?190.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Elastic Lateral-Torsional Buckling Strength of Doubly Symmetric I-Beams with Singly Stepped at Midspan Subjected to General Loading Condition Considering Load-Height Effect
대한토목학회 학술대회
2017 .10
-
비부착 긴장력이 거더의 횡비틀림 안정성에 미치는 영향
한국구조물진단유지관리공학회 논문집
2018 .01
-
Lateral-torsional buckling of functionally graded tapered I-beams considering lateral bracing
Steel and Composite Structures, An International Journal
2018 .01
-
Evaluation of Inelastic Lateral-Torsional Buckling Strength of Stepped I-Beam with Continuous Lateral Bracing Subjected to Top Flange Loading
대한토목학회 학술대회
2016 .10
-
An alternative evaluation of the LTB behavior of mono-symmetric beam-columns
Steel and Composite Structures, An International Journal
2019 .01
-
Investigation of the Instability of FGM box beams
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Investigation of the Instability of FGM box beams
Structural engineering and mechanics : An international journal
2015 .01
-
비틀림 보강근 상세에 따른 철근콘크리트 보의 비틀림 거동 평가
한국콘크리트학회 학술대회 논문집
2020 .06
-
On the evaluation of critical lateral buckling loads of prismatic steel beams
Steel and Composite Structures, An International Journal
2015 .01
-
Simplified approach to estimate the lateral torsional buckling of GFRP channel beams
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Dynamic torsional response measurement model using motion capture system
Smart structures and systems
2017 .01
-
Dynamic torsional response measurement model using motion capture system
Smart Structures and Systems, An International Journal
2017 .01
-
차량의 횡방향 안정성 보장을 위한 위상 평면 예측기 구성
한국자동차공학회 추계학술대회 및 전시회
2024 .11
-
Vision-based multipoint measurement systems for structural in-plane and out-of-plane movements including twisting rotation
Smart Structures and Systems, An International Journal
2017 .01
-
Optimal lateral load pattern for pushover analysis of building structures
Steel and Composite Structures, An International Journal
2019 .01
-
Vision-based multipoint measurement systems for structural in-plane and out-of-plane movements including twisting rotation
Smart structures and systems
2017 .01
-
고강도 콘크리트 보의 비틀림 거동
한국콘크리트학회 학술대회 논문집
2018 .05
-
복합하중을 받는 철근콘크리트 보의 비틀림 거동
한국콘크리트학회 학술대회 논문집
2019 .05
-
철근콘크리트 보의 비틀림 거동 분석
한국콘크리트학회 학술대회 논문집
2016 .05
-
회전축의 비틀림, 횡진동 연성 연구
한국소음진동공학회 학술대회논문집
2015 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-532-000881336