메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
S. Vishvanathperumal (Adhiparasakthi Engineering College) S. Gopalakannan (Adhiparasakthi Engineering College)
저널정보
한국고분자학회 폴리머 폴리머 제41권 제3호
발행연도
2017.5
수록면
433 - 442 (10page)
DOI
10.7317/pk.2017.41.3.433

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The ethylene-propylene-diene monomer (EPDM)/styrene-butadiene rubber (SBR)/nanoclay (NC) nanocomposites were prepared with various nanoclay contents loading and different crosslinking systems by using an open mill mixer. Sulfur, dicumyl peroxide and the mixed system were used as crosslinking systems for the nanocomposites. The effects of nanoclay loading and crosslinking systems on the swelling behavior, compression set behavior, abrasion resistance, hardness, rebound resilience and water uptake of EPDM/SBR blends were investigated. Mole percent uptake of aromatic, aliphatic and chlorinated hydrocarbons through the nanocomposites was investigated at 23℃. The peroxide cured nanocomposites have exhibited the lowest solvent uptake in all the penetrant as well as the lowest uptake exhibited by aliphatic hydrocarbons. An increase in nanoclay loading resulted in reduction in water uptake and rebound resilience as well as increases in compression set, hardness, and abrasion resistance in all the crosslinking systems.

목차

Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References

참고문헌 (52)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-578-000786050