지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
In this paper, we investigate the capacity of the lock-in infrared thermography technique for the evaluation of non-uniform top layers of a silicon carbide coating with a nickel based superalloy sample. The method utilized a multilayer heat transfer model to analyze the surface temperature response. The modelling of the sample was done in ANSYS. The sample consists of three layers, namely, the metal substrate, bond coat and top coat. A sinusoidal heating at different excitation frequencies was imposed upon the top layer of the sample according to the experimental procedures. The thermal response of the excited surface was recorded, and the phase angle image was computed by Fourier transform using the image processing software, MATLAB and Thermofit Pro. The correlation between the coating thickness and phase angle was established for each excitation frequency. The most appropriate excitation frequency was found to be 0.05 Hz. The method demonstrated potential in the evaluation of coating thickness and it was successfully applied to measure the non-uniform top layers ranging from 0.05 mm to 1 mm with an accuracy of 0.000002 mm to 0.045 mm.
목차
Abstract
1. Introduction
2. Materials and methods
3. Results and discussions
4. Conclusions
References
참고문헌 (35)
참고문헌 신청
S. Ranjit, Y. Chung and W. Kim, Thermal behavior variations in coating thickness using pulse phase thermography, Journal of the Korean Society for Nondestructive Testing, Vol. 36, No. 4, pp. 259-265 (2016)
S. Mezghani, E. Perrin, V. Vrabie, J. Bodnar, J. Marthe and B. Cauwe, Evaluation of paint coating thickness variations based on pulsed Infrared thermography laser technique, Infrared Physics & Technology, Vol. 76, pp. 393-401 (2016)
J. Roy, S. Chandra, S. Das and S. Maitra, Oxidation behaviour of silicon carbide-a review, Rev. Adv. Mater. Sci, Vol. 38, pp. 29-39 (2014)
R. Munro and S. Dapkunas, Corrosion characteristics of silicon carbide and silicon nitride, Journal of research of the National Institute of Standards and Technology, Vol. 98, No. 5, pp. 607 (1993)
X. Yang, C. Zhao-hui and C. Feng, Hightemperature protective coatings for C/SiC composites, Journal of Asian Ceramic Societies, Vol. 2, No. 4, pp. 305-309 (2014)
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Thermal Behavior Variations in Coating Thickness Using Pulse Phase Thermography
비파괴검사학회지
2016 .08
-
열파 이미징에 의한 박리결함 열적 특성에 대한 광-적외선 열화상 시뮬레이션 연구
한국기계기술학회지
2019 .01
-
연소율 제어 로켓 연료 제작을 위한 진동 기반 딥코팅
대한기계학회 춘추학술대회
2020 .12
-
Visualization of Steel Bridge Coating Thickness and Delamination using UAV based Laser Thermography System
대한토목학회 학술대회
2020 .10
-
A review on the failure behavior and countermeasures of thermal barrier coatings
Journal of Ceramic Processing Research
2023 .04
-
Nickel Aluminides Coating on Aluminum Substrate Using a Reaction Synthesis Process
Metals and Materials International
2015 .01
-
적외선 열화상 이미지 컨트라스트 파라미터를 이용한 결함 크기의 비파괴 평가
신뢰성응용연구
2018 .03
-
광섬유 대량생산시스템 이중 액상코팅공정의 점성소산 및 공정인자 영향성 해석연구
반도체디스플레이기술학회지
2018 .01
-
Detection and Quantification of Defects in Composite Material by Using Thermal Wave Method
비파괴검사학회지
2015 .12
-
Ni 본드코팅이 Al 기지에 고온 용사 코팅된 Fe 코팅층의 접합특성에 미치는 영향
한국재료학회지
2016 .01
-
Evaluation of Degradation Characteristics of Thermal Barrier Coating on Gas Turbine Blades
KEPCO Journal on electric power and energy
2016 .01
-
선박용 코팅의 수침초음파에 의한 도막두께 평가
대한기계학회 춘추학술대회
2021 .11
-
광섬유 2차 코팅다이 형상 변화에 따른 유리섬유 고속 코팅공정 영향성 해석연구
반도체디스플레이기술학회지
2019 .01
-
Performance Evaluation of Atomization-Based Uniform Spray Coating for 3D Scanning
Journal of the Korean Society for Precision Engineering
2017 .10
-
Effect of coating thickness on contact fatigue and wear behavior of thermal barrier coatings
Journal of Ceramic Processing Research
2019 .01
-
위상잠금 중파장 적외선 열화상 기법에 의한 결함 계측에서 측정 대상체의 재질에 따른 위상잠금 주파수 연구
한국기계가공학회지
2019 .09
-
Influence of atmospheric temperature and relative humidity on sub-surface defect detection in concrete structures using Infrared Thermography
대한토목학회 학술대회
2016 .10
-
PCB 컨포멀 코팅 두께 측정
대한전자공학회 학술대회
2018 .06
-
철계 비정질 분말을 활용한 초고속 용사 코팅층 개발
한국분말야금학회지
2021 .12
-
기계학습 기반의 블레이드 코팅 최적화
대한기계학회 춘추학술대회
2021 .05
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-530-000790616