메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
강주원 (포항공과대학교) 황경원 (포항공과대학교) 박현선 (포항공과대학교) Moriyama Kiyofumi (포항공과대학교) 김무환 (포항공과대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2016년도 학술대회
발행연도
2016.12
수록면
446 - 450 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
We measured how the condensation heat transfer coefficient h inside a horizontal tube changes by hydrophobic coating on the condensing surface. We built horizontal test sections in which steam flows inside a tube and coolant flows outside as counter flow. The 2-meter-long stainless steel tubes were used as condensing tubes, which were two types: one as purchased and the other tube coated internally with polytetrafluoroethylene (PTFE). The outer diameter of the tubes was 50.8 mm, and the inner diameter was 47 mm. Steam at saturation temperature was supplied to the test section with maximum mass flux of 12.2 kg/m2/s at a pressure 1.5 bar. Tube outer wall temperatures, coolant temperature difference between inlet/outlet, and coolant mass flow rate were measured for calculation of h. The value of h was 53% increased in the PTFE-coated tube than in the normal tube. This result shows usefulness of the present method for the improvement of the efficiency of heat exchangers.

목차

Abstract
1. 서론
2. 실험 장치
3. 데이터 해석방법
4. 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-550-002056291