지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제40권 제8호
- 발행연도
- 2016.10
- 수록면
- 698 - 703 (6page)
이용수
초록· 키워드
오류제보하기
Francis hydro turbines have been most widely used throughout the world because of their wide range of head and flow rate applications. In most applications, they are used for high heads and flow rates. Currently, Korea is developing technology for Francis hydro turbine design and manufacture. In order to understand the internal details of Francis hydro turbines further, a new Francis turbine model runner is designed and model internal flow characteristics are investigated. The specific speed of the Francis hydro turbine model runner is Ns = 200 m-kW-min-1. The runner blade is designed successfully according to the port area and one-dimensional loss analysis. The best efficiency point of the Francis hydro turbine model achieves 90% at the design condition. CFD analysis yields a hill chart of the Francis hydro turbine model for use in predicting performance.
목차
Abstract
1. Introduction
2. Francis hydro turbine Model and Numerical Method
3. Results and Discussion
4. Conclusion
References
참고문헌 (12)
참고문헌 신청
[인터넷자원] - IHA Central Office / / 2015 Hydropower Status Report / International Hydropower Association
[학술지(정기간행물)] - Zhenmu Chen / 2016 / The effect of runner blade loading on the performance and internal flow of a francis hydro turbine model / Journal of Mechanical Science and Technology 30 (4) : 1617 ~ 1623
[학술지(정기간행물)] - 천쩐무 / 2016 / A Study on the Effect of Port Area of Blade on the Performance of Francis Hydro Turbine / 한국유체기계학회 논문집 19 (1) : 5 ~ 10
[학술지(정기간행물)] - Z. Chen / 2016 / Francis turbine blade design on the basis of port area and loss analysis / Energies 9 (3)
[학술지(정기간행물)] - Chengcheng Chen / 2015 / A Feasibility Study on the Flow Passage Shape for an Inline Francis Hydro Turbine / 한국유체기계학회 논문집 18 (2) : 5 ~ 13
[학술지(정기간행물)] - Zhenmu Chen / 2016 / The effect of runner blade loading on the performance and internal flow of a francis hydro turbine model / Journal of Mechanical Science and Technology 30 (4) : 1617 ~ 1623
[학술지(정기간행물)] - 천쩐무 / 2016 / A Study on the Effect of Port Area of Blade on the Performance of Francis Hydro Turbine / 한국유체기계학회 논문집 19 (1) : 5 ~ 10
[학술지(정기간행물)] - Z. Chen / 2016 / Francis turbine blade design on the basis of port area and loss analysis / Energies 9 (3)
[학술지(정기간행물)] - Chengcheng Chen / 2015 / A Feasibility Study on the Flow Passage Shape for an Inline Francis Hydro Turbine / 한국유체기계학회 논문집 18 (2) : 5 ~ 13
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Flow Induced Vibrations in a Francis Turbine
한국유체기계학회 학술대회 논문집
2015 .12
-
Numerical Analysis of Unsteady Flow Characteristics under Rated-Condition of a Francis Turbine with Specific Speed of 210-Class
AFORE
2023 .11
-
Reliability Analysis on a 50MW Francis Turbine
한국유체기계학회 학술대회 논문집
2017 .12
-
A Study on the Effect of Port Area of Blade on the Performance of Francis Hydro Turbine
한국유체기계학회 논문집
2016 .02
-
Numerical Simulation of Flow in Francis-99 Turbine by Unsteady Analysis
한국신·재생에너지학회 학술대회 초록집
2016 .05
-
Optimization of the Blade Angle Distribution for a Francis Turbine Runner of Class-120
AFORE
2022 .09
-
Model analysis and surface roughness investigation of Francis turbine
한국유체기계학회 학술대회 논문집
2017 .07
-
Numerical Investigation of Hydraulic Performance and Internal Flow Characteristics of Francis Turbine Model for Various Turbulence Models
AFORE
2024 .11
-
Performance analysis of micro-class Francis hydro turbine by CFD
한국유체기계학회 학술대회 논문집
2017 .07
-
Performance Analysis of Micro-Class Francis hydro turbine by CFD
한국신·재생에너지학회 학술대회 초록집
2017 .09
-
CFD Analysis and Performance Estimation of a Francis Hydro Turbine Model
대한기계학회 춘추학술대회
2015 .05
-
Internal Flow Characteristics of a Francis Hydro Turbine Model by Internal Flow Passage Shapes
한국유체기계학회 논문집
2015 .10
-
Vortex flow control in a Francis draft tube with radially adjustable rods in a 200 MW Francis prototype
대한기계학회 춘추학술대회
2024 .11
-
A Study on the Suppression of Swirl Flow in the Draft Tube of Francis Turbine
한국유체기계학회 학술대회 논문집
2016 .11
-
수력발전 고장진단예측 사례 연구
한국유체기계학회 학술대회 논문집
2017 .12
-
CFD Analysis of the Francis Turbine Draft Tube with J-Groove Application
한국신·재생에너지학회 학술대회 초록집
2017 .05
-
Structural Safety Evaluation of a Francis Hydro Turbine Model at Normal Operation Condition
한국유체기계학회 논문집
2017 .08
-
수차의 기초설계 방법
한국유체기계학회 학술대회 논문집
2017 .12
-
Cavitating Turbulent Flow Study for Low Head Francis Turbine by Transient Analysis
International Journal of Fluid Machinery and Systems
2019 .03
-
Francis Turbine Model Design and Internal Flow Analysis
한국유체기계학회 학술대회 논문집
2015 .12
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-559-001630461