메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이동찬 (고려대학교) 김동우 (고려대학교) 박성기 (고려대학교) 양원석 (고려대학교) 김용찬 (고려대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2016년도 하계학술발표대회 논문집
발행연도
2016.6
수록면
566 - 569 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This study is to analyze pressure drop and HTC(Heat Transfer Coefficient) in a BPHE(Brazing type Plate Heat Exchanger) using R-1234ze(E) which is known as a substitutional refrigerant of R-134a. The BPHE was installed as a evaporator in the test section and the temperature for evaporating conditions are set to 5, 10 and 15℃. Secondary fluid was used to supply heat to the evaporator and a cooling chiller was used to cool the refrigerant after it has absorbed heat from the test section. Quality of refrigerant entering into the test section was controled by regulating power supplied to the pre-heater that a electricity heater is inserted to copper pipe. The trend of the pressure drop and HTC with respect to average vapor quality has been analyzed to make reasonable explanation for the phenomena. The trend of the pressure drop was varied depending mainly on the mass flux G because dominance of either frictional or gravitational pressure drop was different for each G. The trend of the HTC also depends critically on the mass flux G showing different patterns for each G as the dependance of convective heat transfer and nucleate boiling heat transfer varies for each G.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-553-001026658