메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이지영 (경상대학교) 김철환 (경상대학교) 김은혜 (경상대학교) 박태웅 (경상대학교) 전준표 (한국원자력연구원) 김선영 (한국원자력연구원)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제48권 제4호(통권 제171호)
발행연도
2016.8
수록면
99 - 106 (8page)
DOI
10.7584/JKTAPPI.2016.08.48.4.99

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Many studies have reported that cellulose nanofibrils (CNFs) show high potential for use in many industries, but this material has been considered too costly for commercialization. An effective treatment is therefore needed to reduce the production costs of CNFs. This study describes the use of electron beam irradiation as a new pretreatment for the manufacture of CNFs and the effectiveness of electron beam irradiation in the refining process, which is a part of CNF production. Bleached kraft pulps were irradiated by an electron beam and subsequently refined, followed by measurement of the freeness and fiber properties. The strengths of treated pulps were identified by preparing handsheets and analyzing their strengths.
Increases in the irradiation dose of the electron beam and in the beating time decreased the freeness and fiber length of the pulps. The images acquired with an optical microscope demonstrated fibrillation of pulps. The handsheets made from the pulps irradiated by the electron beam and beaten showed lower strengths because of the reduction in the degree of polymerization and crystallinity. Therefore, electron beam irradiation is concluded to reduce the amount of electric energy needed in the manufacturing process of CNFs, but the irradiation dose of electron beam must be controlled to avoid severe deterioration of the fiber strength.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0