지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.10 No.2
- 발행연도
- 2016.6
- 수록면
- 189 - 203 (15page)
이용수
초록· 키워드
오류제보하기
This paper investigates on the use of advanced optical measurement methods, i.e. 3D coordinate measurement machines (3D CMM) and stereo-vision digital image correlation (3D DIC), for the mechanical analysis of shear deficient prestressed concrete members. Firstly, the experimental program is elaborated. Secondly, the working principle, experimental setup and corresponding accuracy and precision of the considered optical measurement techniques are reported. A novel way to apply synthesised strain sensor patterns for DIC is introduced. Thirdly, the experimental results are reported and an analysis is made of the structural behaviour based on the gathered experimental data. Both techniques yielded useful and complete data in comparison to traditional mechanical measurement techniques and allowed for the assessment of the mechanical behaviour of the reported test specimens. The identified structural behaviour presented in this paper can be used to optimize design procedure for shear-critical structural concrete members.
목차
Abstract
1. Introduction
2. Experimental Research
3. Results and Discussion
4. Conclusions
References
참고문헌 (35)
참고문헌 신청
[기타자료] - American Concrete Institute / 2011 / Aci 318–11 building code requirements for structural concrete and commentary
[단행본] - Balázs, G. L. / 2010 / Bulletin 57:Shear and punching shear in RC and FRC elements / Fédération Internationale du Béton (fib) : 1 ~ 13
[학술대회논문] - Bossuyt, S. / 2012 / Optimized patterns for digital image correlation / Proceedings of the SEM International Conference and Exposition on Experimental and Applied Mechanics, volume 3: Imaging Methods for Novel Materials and Challenging Applications
[기타자료] - / 2009 / Bureau for Standardisation NBN / Nbn en 12390–3
[기타자료] - / 2009 / Bureau for Standardisation NBN / Nbn en 12390–5
[단행본] - Balázs, G. L. / 2010 / Bulletin 57:Shear and punching shear in RC and FRC elements / Fédération Internationale du Béton (fib) : 1 ~ 13
[학술대회논문] - Bossuyt, S. / 2012 / Optimized patterns for digital image correlation / Proceedings of the SEM International Conference and Exposition on Experimental and Applied Mechanics, volume 3: Imaging Methods for Novel Materials and Challenging Applications
[기타자료] - / 2009 / Bureau for Standardisation NBN / Nbn en 12390–3
[기타자료] - / 2009 / Bureau for Standardisation NBN / Nbn en 12390–5
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
강도여유율을 고려한 프리스트레스트 콘크리트 보의 최소전단철근비
대한건축학회 논문집 - 구조계
2017 .05
-
Mechanical Properties Identification of Sheet Metals by 2D - Digital Image Correlation Method
한국자동차공학회 춘계학술대회
2018 .06
-
Full-Field Strain Measurement and Mechanical Properties Identification of Sheet Metals by using DIC method
한국소성가공학회 학술대회 논문집
2016 .10
-
Behaviour of continuous prestressed concrete beams with external tendons
Structural engineering and mechanics : An international journal
2015 .01
-
Control of Tensile Stress in Prestressed Concrete Members Under Service Loads
International Journal of Concrete Structures and Materials
2018 .05
-
Shear Deformation of Steel Fiber-Reinforced Prestressed Concrete Beams
International Journal of Concrete Structures and Materials
2016 .09
-
On the Evaluation of Prestress Loss in PRC Beams by Means of Dynamic Techniques
International Journal of Concrete Structures and Materials
2018 .01
-
Nonlinear probabilistic shear panel analysis using advanced sampling techniques
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
Theoretical model to determine bond loss in prestressed concrete with reinforcement corrosion
Structural engineering and mechanics : An international journal
2018 .01
-
유한요소법을 이용한 프리스트레스트 콘크리트 깊은 보의 전단 거동 해석
한국전산구조공학회논문집
2019 .01
-
Study on Improvement of Measurement Precision in Digital Image Correlation Measurement Method by Using Subpixel Algorithms
Journal of the Korean Society for Precision Engineering
2015 .12
-
DIC 기법을 이용한 인장 물성 측정의 실험 정확성에 관한 연구
대한기계학회 춘추학술대회
2015 .11
-
Minimum shear reinforcement ratio of prestressed concrete members for safe design
Structural engineering and mechanics : An international journal
2015 .01
-
Prestress and excitation force identification in a prestressed concrete box-girder bridge
Computers and Concrete, An International Journal
2017 .01
-
Application of 3D DIC (Digital Image Correlation) Technique for the Measurement of Wind Blade Properties from Coupon Test and a Small-Sized Blade Frequency Test
AFORE
2023 .11
-
Experimental characterization of ultrasonic nonlinearity in concrete under cyclic change of prestressing force
Computers and Concrete, An International Journal
2017 .01
-
대면적 대상물 변위계측을 위한 스테레오 카메라 3차원 DIC 시스템 기초설계 및 검증에 관한 연구
화약발파
2020 .01
-
Prestressed Concrete Design to Eurocodes 외
대한토목학회지
2016 .06
-
Effects of prestressing force on natural frequency of prestressed concrete beams considering self-weight
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-532-000856057