메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국복식학회 복식 복식 제55권 제4호
발행연도
2005.7
수록면
95 - 106 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study was to research the design methods to express jacquard design using CAD. For this study, two design patterns were divided; in addition, each design pattern is applied to two different weaving types, single woven fabric and double well cloths. As a result, 16 samples were produced by applying 4 design methods (warp shrunk as half size design/weft shrunk as half size design - A, warp shrunk as half size design/weft original size design - B, warp original size design/weft shrunk as half size design - C, warp original size design/weft original size design - D) to the two design patterns with the two weaving types. The result of this study can be summarized as follows. 1. The most delicate design method was Method D. However, Method B which took half the time less than Method D was almost as delicate as the Method D on the surface. 2. Method B was judged as a considerably efficient method for time and cost. 3. Method D was considered as most suitable for elaborate parts and delicate lines. However, it was considered uneconomical since it took the longest time. 4. Mettled A took 2.5 times less time than Method D. Therefore, Method A was more applicable to producing high density design. 5. Method C is not considered as a useful method as it showed rough surface and took long time by applying high design zoom except intentional design.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-381-000756113