메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강동호 (조선대학교) 이용근 (조선대학교) 박진홍 (조선대학교)
저널정보
대한치과재료학회 대한치과재료학회지 대한치과재료학회지 제43권 제1호
발행연도
2016.3
수록면
51 - 60 (10page)
DOI
10.14815/kjdm.2016.43.1.51

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Increasing demands for high esthetics have led in an evolution in all-ceramic restorations. Typically, zirconia is widely used as blanks in CAD/CAM dentistry. In recent years, many studies have been reported to improve the transparency of zirconia, however, it"s noncubic crystal structure limit to remain translucent materials. The fabrication of transparent spinel using LiF as a sintering aid by hot pressing process was investigated in this study. Spinel is widely regarded as one of the most promising optical ceramics and already used in dentistry for decades. Spinel was completely mixed using ultrasonic probe with 0.1~0.3 wt% LiF by wet process with distilled water and ethanol. Then centrifuged and removed the supernatant. After drying overnight subsequent rolling, hot pressed at 1450℃ for 1 hr under pressure of 25~45 MPa using graphite die set.Particle size distribution of spinel powder was analyzed with a laser diffraction. Density of the hot pressed samples was determined by Archimedes" principle. Biaxial flexural strength of the hot pressed samples was measured using universal testing machine. Density and strength of the hot pressed samples were decreased with increasing LiF content, while increased with increasing loading of hot pressing. All densities showed higher than 96% of the theoretical density(3.58 g/cm3). The maxima value of density and strength in this study were obtained when hot pressed at 1450℃ for 1 hr under pressure of 45 MPa with 0.1 wt% LiF, namely (3.57±0.02) g/cm3 and (297±37) MPa. The enhancing strength is expected if applying improved hot pressing method such as pulsed or isostatic. Remarkable transmittant(86.8%), that is very close to the theoretical value(87%), sample successfully obtained when hot pressed at 1450℃ for 1 hr under pressure of 45 MPa with 0.2 wt% LiF and subsequent polishing. Following research on the clinical application of the transparent spinel in esthetic dentistry is highly recommended hereafter.

목차


Ⅰ. INTRODUCTION
Ⅱ. MATERIALS AND METH
Ⅲ. RESULTS
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Ⅵ. REFERENCES

참고문헌 (53)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-515-002731336