메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
한천구 (청주대) 한인덕 (청주대)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第31卷 第9號
발행연도
2015.9
수록면
35 - 42 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Although water-to-cement ratio is the main factor of determining the compressive strength of the concrete, sand-to-aggregate ratio, and unit water content dominate segregation resistance and target slump of the concrete, respectively. Therefore, in this research, to suggest a fundamental data on sand-to-aggregate ratio and unit water content for mix design of high strength concrete, fundamental properties of the high strength concrete of 30 % water-to-cement ratio were evaluated depending on the various sand-to-aggregate ratio and unit water content. As a result of the experiment, for fresh state concrete properties, as the sand-to-aggregate ratio was increased, slump, slump flow, and air content were decreased, and as the unit water content was increased, slump, slump flow, and air content were increased. Based on the 180 mm of slump, each slump and slump flow measurements deduced favorable performances at lower and higher than this value, respectively. In segregation aspect, about 45 % of sand-to-aggregate ratio was good and under this conditions, it was good to control the superplasticizer dosage and unit water content. Furthermore, to achieve better compressive strength, under the 45 or 50 % of sand to aggregate ratio, low unit water content of 165 kg/m<SUP>3</SUP> showedmaximumvalueofcompressivestrength.

목차

Abstract
1. 서론
2. 실험계획 및 방법
3. 실험결과 및 분석
4. 결론
REFERENCES

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-540-001977802