메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
J.S. Yu (University of Toronto) G. Jin (University of Toronto) S.L. Cheng (Tianjin University) W.T. Ng (University of Toronto)
저널정보
전력전자학회 ICPE(ISPE)논문집 ICPE 2015-ECCE Asia
발행연도
2015.6
수록면
1,768 - 1,771 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Traditional fixed dead-time driving strategy can lead to unwanted body-diode conduction or momentary cross-conduction. Since the optimum dead-time varies with the load current, it is important to continuously adjust the dead-time on a cycle by cycle basis. The turning on and off of the switching node also require different dead-times. This paper introduces a digital continuous dead-time correction circuit that can adjust the optimum timing for both the rising and falling edges of the output switching waveform for an integrated non-inverting tri-mode DC-DC converter. The converter is designed to operate with a Li-ion battery as the input power supply (2.7 V to 4.2 V) and to provide an output voltage ranging from 1 V to 5 V. An improvement in peak power conversion efficiency of 3% is observed when the output current varies from 0 to 0.5 A with a switching frequency of 1.5 MHz.

목차

Abstract
I. INTRODUCTION
II. PROPOSED TECHNIQUES
III. EXPERIMENTAL SETUP
IV. CONCLUSIONS
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0