지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows.
(1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area.
(2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed.
(3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year.
(4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings.
(5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.
(1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area.
(2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed.
(3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year.
(4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings.
(5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.
#Fluid machinery(유체기계)
#Duct(덕트)
#Pipe(파이프)
#Fuel cell(연료전지)
#Organic Rankine cycle(유기랭킨사이클)
#Heat transfer(열전달)
#Cooling and heating(냉난방)
#Air conditioning(공기조화)
#Refrigeration(냉동)
#Fluid flow(유체유동)
#Building facility(건축설비)
#Built environment(건축환경)
#Piping(배관)
#New and renewable energy(신재생에너지)
#Heat exchanger(열교환기)
#Heat pipe(히트파이프)
#Phasechange(상변화)
#Alternative refrigerants(대체냉매)
#Heating(난방)
#Ventilation(환기)
#Indoor air quality(실내공기질)
#Thermal comfort(온열쾌적성)
#Load analysis(부하계산)
목차
Abstract
1. 서론
2. 열유체
3. 열전달 및 열교환기
4. 냉동
5. 건축기계설비
6. 건축환경
7. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
설비공학 분야의 최근 연구 동향 : 2016년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2017 .06
-
설비공학회 분야의 최근 연구 동향 : 2017년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2018 .06
-
설비공학 분야별 최근 연구 동향 : 2018년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2019 .06
-
설비공학 분야별 최근 연구 동향 : 2020년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2021 .06
-
설비공학 분야별 최근 연구 동향: 2022년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2023 .06
-
설비공학 분야별 최근 연구 동향: 2021년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2022 .06
-
공기-물 직접 접촉식 열교환기를 구비한 농업시설 난방용 히트펌프시스템의 성능 분석
신·재생에너지
2017 .09
-
설비공학회 분야의 최근 연구 동향 : 2015년 학회지 논문에 대한 종합적 고찰
설비공학논문집
2016 .06
-
냉각공기 유속 측정에 기반한 철도차량용 공기압축기 열교환기의 열전달 특성 분석
설비공학논문집
2017 .09
-
축열식 열교환기의 축/방열 특성
대한설비공학회 학술발표대회논문집
2016 .06
-
난방 부하에 따른 열교환기 설계 변경이 전열량에 미치는 영향
대한설비공학회 학술발표대회논문집
2018 .11
-
Design and Analysis of Heat Exchanger Using Sea Water Heat Source for Cooling
KIEAE Journal
2016 .06
-
High Efficiency Plate Type Heat Exchangers for Energy Recovery from Flue Gas
대한기계학회 춘추학술대회
2019 .11
-
소규모 건축물용 히트펌프 기반 통합설비의 실증 적용
대한설비공학회 학술발표대회논문집
2022 .06
-
동절기 환경조건에서 파형 열교환기 배열에 따른 공기측 열전달 특성에 관한 연구
한국기계기술학회지
2018 .01
-
파형 열교환기의 열전달 및 유동특성에 관한 전산해석 연구
한국기계기술학회지
2017 .01
-
설비공학 분야별 최근 연구 동향 : 2019년 설비공학논문집 발표논문에 대한 종합적 고찰
설비공학논문집
2020 .06
-
상하 채널 내 유량이 다른 판형 열교환기의 열전달 모델링 연구
대한기계학회 춘추학술대회
2018 .12
-
건물의 침기율 모델링에 따른 지중 열교환기 용량 산정의 불확실성
한국건축친환경설비학회 논문집
2022 .02
-
An Experimental study of condensation heat transfer characteristics of an absorption refrigeration system
대한설비공학회 학술발표대회논문집
2020 .11
이 논문의 저자 정보
이 논문과 함께 이용한 논문
설비공학 분야의 최근 연구 동향 : 2013년 학회지 논문에 대한 종합적 고찰
이대영
,
김사량
,
김현정
외 3명
설비공학논문집
2014
.12
설비공학 분야의 최근 연구 동향 : 2012년 학회지 논문에 대한 종합적 고찰
한화택
,
이대영
,
김사량
외 4명
설비공학논문집
2013
.06
캐스케이드 시스템 특징과 국내 설치 사례
라태상
,
조항남
,
권오영
설비저널
2015
.06
에너지절약 신기술 적용사례
장기창
설비저널
2014
.04
에너지 성능지표 기계부문 항목에 따른 업무용 건물의 에너지 절감율 분석
이호진
,
김서훈
,
정재욱
외 2명
KIEAE Journal
2013
.08
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-553-001675562