지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2015.4
- 수록면
- 165 - 168 (4page)
이용수
초록· 키워드
오류제보하기
The thin rectangular plate storage structure which temporarily stores fuel assembly or control element assembly is connected by bolting between clamping plates and embedment plates on the wall. The fuel assembly is vertically rested on the bar plate located in the bottom of structure. Also the reinforcing plates embracing thin rectangular plate storage structure are installed to support the lateral loads. The three sides of reinforcing plates are fixed and the remaining one side is free. The finite element model using ANSYS Workbench is made from three dimensional design model using Pro/Engineer to generate the analysis model similar to the storage structure for accurate modal analysis. The embedment plates of structure are fixed as a boundary condition of the analysis model. To evaluate the dynamic characteristics of this structure due to storage of the fuel assembly, two cases of modal analysis with and without consideration for fuel assembly are performed. To evaluate structural integrity for seismic loads, the modal analysis is required prior to dynamic response analysis reflecting the accurate dynamic characteristics of structure. Therefore, the modal analysis for this structure using 3 dimensional finite element model considering the real and actual boundary condition and geometric configuration is performed in this paper.
목차
ABSTRACT
1. 서론
2. 해석모델
3. 동특성해석
4. 결론
참고문헌
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Free Vibration of Glass Rectangular Plates
대한기계학회 춘추학술대회
2015 .05
-
고밀도 U3Si2 핵연료판의 곡면 가공에 대한 연구
대한기계학회 춘추학술대회
2024 .11
-
다각(多角)으로 Swaging된 판형연료집합체의 인장시험 평가
대한기계학회 춘추학술대회
2016 .05
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
Deflection of axially functionally graded rectangular plates by Green’s function method
Steel and Composite Structures, An International Journal
2019 .01
-
Forced vibrations of an elastic rectangular plate supported by a unilateral two-parameter foundation via the Chebyshev polynomials expansion
Structural Engineering and Mechanics, An Int＇l Journal
2024 .06
-
삼각배열을 갖는 사각다공평판의 유효탄성계수 평가
한국소음진동공학회 학술대회논문집
2015 .04
-
Thermal-fluid-structure coupling analysis on plate-type fuel assembly under irradiation. Part-II Mechanical deformation and thermal-hydraulic characteristics
Nuclear Engineering and Technology
2021 .05
-
Modal characteristics of partially perforated rectangular plate with triangular penetration pattern
Structural engineering and mechanics : An international journal
2015 .01
-
Bending of an isotropic non-classical thin rectangular plate
Structural engineering and mechanics : An international journal
2017 .01
-
Thermo-mechanical coupling behavior analysis for a U ? 10Mo/Al monolithic fuel assembly
Nuclear Engineering and Technology
2021 .09
-
Buckling Analysis of Rectangular Plates using an Enhanced 9-node Element
ARCHITECTURAL RESEARCH
2016 .09
-
Wind load characteristics of large billboard structures with two-plate and three-plate configurations
Wind & structures
2016 .01
-
Channel Gap Measurements of Irradiated Plate Fuel and Comparison with Post-Irradiation Plate Thickness
Nuclear Engineering and Technology
2023 .06
-
Dynamic analysis of a transversely isotropic non-classical thin plate
Wind & structures
2017 .01
-
플레이트의 소성변형 과정이 재건술에서 플레이트 안정성에 미치는 영향
한국CDE학회 논문집
2016 .09
-
Vibration of a Circular plate on Pasternak foundation with variable modulus due to moving mass
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Analysis of laminated composite plates based on different shear deformation plate theories
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
면내조합하중과 횡압 하의 선박 이중판 설계시스템 구축
한국해양공학회지
2019 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-539-001403864