전자광학 카메라를 탑재한 지구관측위성의 촬영 영상에 대한 요구 해상도 수준이 미터급 이하로 내려감에 따라 위성영상 성능에 영향을 주는 여러 가지 요소 중 특히 반작용 휠, 안테나 구동기, 극저온 냉각기 등의 미소진동에 의한 영상성능 저하에 대한 분석이 요구되고 있다. 진동원에서 발생한 미소진동은 위성 구조체를 통하여 전자광학 카메라의 각 구성요소에 전달되며 이들 각 구성요소의 진동은 초점면 어레이에 맺히는 영상을 흔들리게 하여 영상의 성능을 저하시킨다. 전자광학 카메라 구성요소의 진동에 의한 영상 성능 저하를 개선하기 위한 방안으로 대형 망원경에 사용되는 고속 스캔 미러를 카세그레인형 전자광학 카메라의 부 반사경에 장착하는 방안을 제시하였으며 LQR 제어기법을 이용하여 미소 진동에 의한 영상 성능저하를 허용 가능한 수준까지 제한할 수 있음을 위성영상 평가지수중 하나인 변조전달함수와 영상을 이용하여 확인하였다.
As the level of image resolution requirement for the satellite equipped with electro optical camera payload goes down below submeter level, more precise analysis on the image performance degradation due to jitter generated from various vibration sources like reaction wheels, antenna actuators for image transmission and cryocoolers is being required. micro vibration is transferred to each component of the electro optical camera, which degrades the image performance. To improve the image performance, it is suggested to replace the secondary mirror with tip-tilt-piston mirror. And it is shown that image quality degradation can be restricted by an appropriate control.