메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Dmitri Vinnikov (Riga Technical University) Indrek Roasto (Tallinn University of Technology) Liisa Liivik (Tallinn University of Technology) Andrei Blinov (Tallinn University of Technology)
저널정보
전력전자학회 JOURNAL OF POWER ELECTRONICS JOURNAL OF POWER ELECTRONICS Vol.15 No.2
발행연도
2015.3
수록면
299 - 308 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study proposes four novel pulse width modulation (PWM) shoot-through control methods for impedance source (IS) galvanically isolated DC-DC converters. These methods are derived from a PWM control method with shifted shoot-through introduced by the authors in 2012. In contrast to the baseline solution, where the shoot-through states are generated by the simultaneous conduction of all transistors in the inverter bridge, our new approach is based on the shoot-through generation by one inverter leg. The idea is to increase the number of soft-switched transients and, therefore, decrease the dynamic losses of the front-end inverter. All the proposed approaches are experimentally verified through an insulated-gate bipolar transistor-based IS DC-DC converter. Conclusions are drawn in accordance with the results of the switching loss analysis.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. IS DC-DC CONVERTERS: OPERATING PRINCIPLE, REALIZATION POSSIBILITIES, AND BASIC CONTROL METHODS
Ⅲ. NEW PWM SHOOT-THROUGH CONTROL METHODS
Ⅳ. PRACTICAL GUIDELINES FOR BUILDING THE CONTROL SYSTEM
Ⅴ. SIMULATION STUDY
Ⅵ. ANALYSIS OF EXPERIMENTAL RESULTS
Ⅶ. CONCLUSIONS AND FUTURE WORK
REFERENCES

참고문헌 (30)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-560-001274568