지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.2
- 수록면
- 49 - 53 (5page)
이용수
초록· 키워드
오류제보하기
An experimental study was conducted to investigate the effect of carbon nanotubes on the zinc corrosion resistance of sealing layer formed on the Tungsten Carbide spray coating. Using the nanotubes, a sealing agent in the form of solid-liquid suspensions was made and applied to the surface of spray coating. A series of experiments, consisted of three stages such as preparation of test piece, molten-pot immersion test, and evaluation of micro structure, were undertaken to demonstrate complicated interaction existing between zinc ions and sealing layer containing the nanotubes.
Experimental results showed newly developed sealing layer were less susceptible to corrosion and thus coated layer was well protected even in the case of 10 days exposure. Comparison of the micro structure after molten pot test also indicated that carbon nanotubes still remained in the matrix and organized more reliable frame work constituted with boron nitride and chromium compound. It was revealed that carbon nanotubes in the sealing layer played positive role to enhance zinc corrosion resistance in the perspective of both fibrous structure and inherent chemical stability.
Experimental results showed newly developed sealing layer were less susceptible to corrosion and thus coated layer was well protected even in the case of 10 days exposure. Comparison of the micro structure after molten pot test also indicated that carbon nanotubes still remained in the matrix and organized more reliable frame work constituted with boron nitride and chromium compound. It was revealed that carbon nanotubes in the sealing layer played positive role to enhance zinc corrosion resistance in the perspective of both fibrous structure and inherent chemical stability.
목차
Abstract
1. 서론
2. 봉공처리 코팅액
3. 실험방법
4. 결과 및 고찰
5. 결론
References
참고문헌 (16)
참고문헌 신청
1. [학술지(정기간행물)] - T. Y. Kang / 2001 / A study on durability of sprayed coating layer in the molten Zn-0.2%Al alloy bath / J. of KWS 19 (9) : 512 ~ 519
2. [기타자료] - Tocalo / 1992 / Composite film coated member excellent in wear resistance and molten metal resistance and its manufacture
3. [학위논문] - D. S. Lee / 1997 / Reaction between HP/HVOF WC coated sink roll and molten zinc / MS / Pohang University
4. [단행본] - J. R. Davis / 2004 / Handbook of Thermal Spray Technology / ASM International
5. [학위논문] - B. G. Seong / 2000 / Reaction of thermally sprayed WC-Co coating with molten zinc / 박사 / Pohang University
2. [기타자료] - Tocalo / 1992 / Composite film coated member excellent in wear resistance and molten metal resistance and its manufacture
3. [학위논문] - D. S. Lee / 1997 / Reaction between HP/HVOF WC coated sink roll and molten zinc / MS / Pohang University
4. [단행본] - J. R. Davis / 2004 / Handbook of Thermal Spray Technology / ASM International
5. [학위논문] - B. G. Seong / 2000 / Reaction of thermally sprayed WC-Co coating with molten zinc / 박사 / Pohang University
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
High-performance Carbon Nanotubes Hydrogen Gas sensor by Separation of Carbon Nanotubes
한국고분자학회 학술대회 연구논문 초록집
2023 .10
-
FexNi1-x 코팅 탄소나노튜브가 적용된 ABS 복합체의 기계적, 차폐 특성에 관한 연구
한국조명·전기설비학회 학술대회논문집
2019 .05
-
Al6061 합금의 양극산화 봉공 처리 방법에 따른 양극산화 피막의 내화학 특성 비교
한국표면공학회지
2024 .06
-
후처리 적용에 따른 방식용 Al-3%Mg 용사코팅 층의 해수 내 전기화학적 특성
한국통신학회논문지
2015 .05
-
탄소나노튜브 이온채널
한국생산제조학회 학술발표대회 논문집
2015 .04
-
Fabricating method and analysis of epoxy-carbon nanotube composites by using amine functionalized carbon nanotubes
한국고분자학회 학술대회 연구논문 초록집
2015 .10
-
Increased Dispersibility of Carbon Nanotubes and Production of High Performance Wet-spun Carbon Nanotube Fibers
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
TiO₂ nanotube plate의 nanotube length별 효용성 평가
한국에너지학회 학술발표회
2015 .11
-
Finite element modeling of the vibrational behavior of multi-walled nested silicon-carbide and carbon nanotubes
Structural engineering and mechanics : An international journal
2017 .01
-
Al-Zn-Zr 용사코팅층의 고체입자 충돌 침식특성에 미치는 봉공처리의 영향
Corrosion Science and Technology
2022 .02
-
Fabrication of High Performance Carbon Nanotube Fiber
한국고분자학회 학술대회 연구논문 초록집
2018 .10
-
Photocatalytic activity of Carbon Nanotube Mixed Titanate Nanotube
한국자동차공학회 춘계학술대회
2017 .05
-
투명 탄소나노튜브 박막을 이용한 액정 필름 제작 연구
한국정밀공학회 학술발표대회 논문집
2018 .05
-
실링처리된 인코넬 625 아크 열용사 코팅 층의 내식성 평가
한국표면공학회 학술발표회 초록집
2019 .05
-
The electrical conductivity of polycarbonate/carbon nanotube nanocomposites as functions of different size of multi-walled carbon nanotube and flow type
한국고분자학회 학술대회 연구논문 초록집
2017 .10
-
Directly-Spun Carbon Nanotube Fibers
한국표면공학회 학술발표회 초록집
2019 .11
-
Formation of Various Nanotube Shapes on the Ti-6Al-4V Alloy for Changing the Tube Volume
한국표면공학회 학술발표회 초록집
2021 .06
-
Fabrication of High-Strength Carbon Nanotube Fiber
한국고분자학회 학술대회 연구논문 초록집
2024 .09
-
Modelling of the interfacial damping due to nanotube agglomerations in nanocomposites
Smart Structures and Systems, An International Journal
2017 .01
-
Carbon nanotube-enhanced membrane for advanced water treatment
대한환경공학회 학술발표논문집
2018 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-581-001278807