지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.2
- 수록면
- 50 - 55 (6page)
이용수
초록· 키워드
오류제보하기
This study takes AC8A, which is a representative light weight alloy as matrix, and nickel as reinforcement for its superior properties. The manufacturing method applied in this study required low pressure for the infiltration of the metal matrix into the reinforcement. Porous Ni was applied as preform. The fabrication was conducted under 0.3 MPa at 600, 700 and 750 degrees centigrade, respectively. Intermetallic compounds Al3 generated between Al and Ni were observed in the composites. Microstructure, Vickers’ hardness and wear characteristics of the composites were also investigated. The result indicates that the structures of compounds created at 650 degree centigrade were distributed densely; the grain size of the substances and the compounds was increased with the infiltration temperature.
목차
Abstract
1. Introduction
2. Experiment
3. Experimental results and discussion
5. Conclusions
References
참고문헌 (13)
참고문헌 신청
1. [학술지(정기간행물)] - C. S. Liauo / 1999 / / Materials Science and Engineering A 271 (1-2) : 79 ~
2. [학술지(정기간행물)] - H. K. Lee / 1995 / / J. of the Korean Inst. of Met. & Mater 33 : 242 ~
3. [학술지(정기간행물)] - J. C. Lee / 1997 / / Met. Trans A 28 : 1251 ~
4. [학술지(정기간행물)] - Anil Borah / 2008 / Microstructural Evolution and Hardening Behaviour of Cast and Heat-treated Ru-Al and Ru-Al-Ni alloys / Metals and Materials International 14 (1) : 123 ~ 132
5. [학술지(정기간행물)] - S. H. Lee / 1997 / / J. of the Korean Inst. of Met. & Mater 35 (1) : 104 ~
2. [학술지(정기간행물)] - H. K. Lee / 1995 / / J. of the Korean Inst. of Met. & Mater 33 : 242 ~
3. [학술지(정기간행물)] - J. C. Lee / 1997 / / Met. Trans A 28 : 1251 ~
4. [학술지(정기간행물)] - Anil Borah / 2008 / Microstructural Evolution and Hardening Behaviour of Cast and Heat-treated Ru-Al and Ru-Al-Ni alloys / Metals and Materials International 14 (1) : 123 ~ 132
5. [학술지(정기간행물)] - S. H. Lee / 1997 / / J. of the Korean Inst. of Met. & Mater 35 (1) : 104 ~
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
저압함침법을 이용한 Ni 과 Ni-Cr으로 강화된 AC8A 복합재료의 마모특성
한국기계기술학회지
2016 .01
-
Microstructure Evolution and Mechanical Performances of SiCf Reinforced (Al3Ti?+?Al3Ni)-Based Metallic?Intermetallic Laminate Composite
Metals and Materials International
2021 .10
-
알루미늄도금강 용접시 형성되는 Fe₃Al, FeAl 및 Fe₂Al5 금속간 화합물의 결합특성
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .11
-
Structural Size Effects of Intermetallic Compounds on the Mechanical Properties of Mo-Si-B Alloy: An Experimental Investigation
Metals and Materials International
2016 .01
-
반응합성 코팅된 Ni-Al 금속간화합물의 미끄럼 마찰마모특성에 관한 연구
한국트라이볼로지학회 학술대회
2015 .10
-
Investigation on High Temperature Mechanical Behaviors of TiC-γ′ Reinforced Ni Composite
Metals and Materials International
2021 .01
-
Understanding of microstructures and mechanical properties of thermal sprayed Ni-based coatings with Al and Mo addition
Journal of Advanced Marine Engineering and Technology (JAMET)
2022 .12
-
Preform-Based Production of Al2O3-Reinforced Aluminium Matrix Composites by Using Various Modification Techniques
Metals and Materials International
2021 .01
-
알루미늄 기판 위 반응합성 Coating 된 Ni-Al계 금속간화합물의 미끄럼마모 특성 해석
Tribology and Lubricants
2018 .04
-
The effects of Mg<sub>2</sub>Si<sub>(p)</sub> on microstructure and mechanical properties of AA332 composite
Advances in materials research : AMR
2016 .01
-
Hot Pressing of Al-10 wt% Cu-10 wt% Ni/x (Al2O3–Ag) Nanocomposites at Different Heating Temperatures
Metals and Materials International
2021 .01
-
In-Situ Synthesis of Aluminum Matrix Composite from Al–NiO System by Mechanical Alloying
Metals and Materials International
2021 .01
-
Investigating the Role of Metal Reinforcement Particles in Producing Cu/Ni/W Metal Matrix Composites via Friction Stir Processing: Microstructure, Microhardness, and Wear at High Temperature
Metals and Materials International
2024 .01
-
재활용 절삭칩으로 제조된 AC2B 합금의 용체화 열처리에 따른 미세조직 및 기계적특성 변화
한국주조공학회지 (주조)
2018 .01
-
Quadratic magnetoelectric effect of barium titanatecobalt ferrite (0-3) ceramic composite
Journal of Ceramic Processing Research
2020 .01
-
Study on Metallurgically Prepared Copper-Coated Carbon Fibers Reinforced Aluminum Matrix Composites
Metals and Materials International
2021 .12
-
Wear behavior of Al2O3/AC8A composites by low pressure infiltration process
한국기계기술학회지
2016 .01
-
기판 grain size가 SAC305/Cu 접합부 계면 금속간화합물 형성에 미치는 영향
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
금속간화합물 형성 제어에 따른 Al-Cu 레이저 용접부 특성 변화
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
-
Multi objective optimization of wear characteristics on Al7075/Al2O3/B4C composites - Desirability approach
Journal of Ceramic Processing Research
2020 .01
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-550-001253187