메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장석준 (충남대학교) 안경림 (충남대학교) 윤현도 (충남대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第31卷 第2號
발행연도
2015.2
수록면
45 - 54 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
This paper describes the effect of aggregate size and fiber volume fraction on flexural properties of steel fiber reinforced concrete(SFRC) with specified compressive strength of 60 MPa. Maximum aggregate size used was 8 and 20mm, and steel fiber volume fraction was 0, 0.5, 1, 1.5, 2% in volume basis, in this study. Flexural properties studied include first-crack strength, flexural strength and toughness index of hardened SFRC. For this purposes, three prisms (100×100×400 mm) form each mixture were made and tested under four points bending on the span length 300 mm. Test results indicated that flexural strength and toughness of SFRC were improved with increasing the volume fraction. Especially, specimens with aggregate size of 8mm were reported higher improvement in flexural toughness index than those with 20mm. This phenomenon are remarkable that fiber dispersion is improved with smaller aggregate size. Also the optimum volume fraction of SFRC was presented for that with 1.5% volume fraction. Based on test results and available literatures, flexural strength prediction model was established from compressive strength, volume fraction and aspect ratio of steel fiber. The model existed a good correlation between measured data.

목차

Abstract
1. 서론
2. 실험계획
3. 실험결과
4. 실험결과분석
5. 결론
참고문헌

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-540-001111542