메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
손성애 (부산대학교) 노형미 (부산대학교) 권용훈 (부산대학교) 진명욱 (경북대학교) 박정길 (부산대학교)
저널정보
대한치과재료학회 대한치과재료학회지 대한치과재료학회지 제41권 제4호
발행연도
2014.12
수록면
245 - 252 (8page)
DOI
10.14815/kjdm.2014.41.4.245

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The aim of this study was to evaluate the influence of the polymerization on shade and thickness of a silorane-based composite resin. A2, A3 and C2 shades of silorane ?based composite resin were selected. The number of photons were detected using the photodiode detector. The microhardness of the specimen was measured using a Vickers hardness at the different thicknesses. The degree of conversion (DC) of the specimens was determined using Fourier transform infrared spectroscopy (FTIR). To measure the polymerization shrinkage, a linometer was used. Data were statistically analyzed by ANOVA and Tukey’s test. In the subsurface, the incident light decreased exponentially. A2 group showed less light attenuation than the other groups(p<0.05). The microhardness of A2 group ranged 52.0-62.3 Hv on top and bottom surfaces, A3 and C2 groups were ranged 48.5-58.3 Hv and 51.6-61.5 Hv, respectively. In the DC, A3 group showed significantly lower when compared to A2 group(p<0.05). Polymerization shrinkage was 7.3-7.6μm and these were significantly similar regardless of the specimens(p>0.05). In conclusion, photons decreased exponentially with increasing specimen thickness. The microhardness and the DC of A3 group were significantly lower than other groups. Polymerization shrinkage had statistically similar values regardless of the groups (p<0.05).

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과
4. 고찰
5. 결론
참고문헌

참고문헌 (30)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-515-000941003