메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
유원경 (부산대학교) 양장식 (부산대학교) 손창민 (부산대학교) 이성한 (두산중공업) 안대현 (두산중공업) 황계하 (두산중공업) 김성하 (두산중공업)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2014년도 추계학술대회
발행연도
2014.11
수록면
1,816 - 1,820 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper studies the effect of inlet cross flow on the heat transfer in narrow radial ducts with the aspect ratio of 12. Total three geometries, one smooth, two wedged ducts, are modeled for analytical studies. Reynolds number is varied in the range from 13100 to 21000. Ratio of the mass flow rate of main flow and cross flow is maintained to 0.5. Heat transfer characteristics of cross flow are compared to those of no cross flow. Normal-inflow (without cross flow) case results show that area-averaged Nu number of smooth duct is highest. Nu number of Wedge 1 duct is 5% lower than smooth duct and Wedge 2 duct is 21% lower than smooth duct. Cross flow case result also show that area-averaged Nu number of smooth duct is highest. Nu number of Wedge 1 duct is 2% lower than smooth duct and Wedge 2 duct is 18% lower than smooth duct. Cross flow case of smooth duct Nu number is decreased 11% than normal inflow case result, Wedge 1 duct is decreased 8% and Wedge 2 duct is decreased 7%.

목차

Abstract
1. 서론
2. 수치 해석
3. 수치해석 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0