본 연구에서는 최근 서비스화 된 PLEIADES의 GSD 0.5m 영상을 이용하여 1/5,000 수치지형도 제작의 가능성을 평가하였다. PLEIADES 영상의 초기 RPC 계수를 적용한 결과, 검사점에 대한 RMSE가 X=±1.806m, Y=±2.132m, Z=±1.973m이며, 초기 RPC 계수와 지상기준점 16점으로 기하보정한 결과, RMSE가 X=±0.104m, Y=±0.171m, Z=±0.036m이며, 검사점에 대한 RMSE는 X=±0.357m, Y=±0.239m, Z=±0.188m로 1/5,000 수치지형도 제작에 대한 허용오차의 기준에 부합하는 것을 확인할 수 있었다. 또한, TerraSAR 기준점을 평가하여 활용 가능성 여부를 확인하기 위해 좌표 변환하여 GPS 측량성과와 비교한 결과, RMSE가 X=±0.818m, Y=±0.200m, Z=±0.265m의 결과를 도출하였다. 본 연구 결과로 PLEIADES 영상과 정확한 지상기준점을 이용하면 1/5,000 수치지형도 제작이 가능하다는 것을 확인하였으며, 비접근 지역의 수치지형도 제작을 위한 기준점 확보 방안으로 TerraSAR 기준점을 평가한 결과, 1/5,000 수치지형도를 제작하기 위한 기준점에는 부합하지는 않았지만, 향후 대안으로써 TerraSAR 기준점을 활용하는 방안에 대하여 추가 연구가 필요하다고 사료된다.
This paper evaluated the possibility for 1/5,000 digital topographic mapping by using PLEIADES images of 0.5m GSD(Ground Sampling Distance) resolution that has recently launched. Those results of check points by applying the initial RPC(Rational Polynomial Coefficient) of PLEIADES images came out as; RMSE of those were X=±1.806m, Y=±2.132m, Z=±1.973m. Also, if we corrected geometric correction using 16 GCP(Ground Control Point)s, the results of RMSE became X=±0.104m, Y=±0.171m, Z=±0.036m, and the RMSE of check points were X=±0.357m, Y=±0.239m, Z=±0.188m; which of those results indicated the accuracy of standard adjustment complied in error tolerances of the 1/5,000 scale. Additionally, we converted coordinates of points, obtained by TerraSAR. for comparing with measurements from GPS(Global Positioning System) surveying. The RMSE of comparing converted and GPS points were X=±0.818m, Y=±0.200m, Z=±0.265m, which confirmed the possibility for 1/5,000 digital topographic mapping with PLEIADES images and GCPs. As method of obtaining GCPs in unaccessible area, however, the outcome evaluation of GCPs extracted from TerraSAR images was not acceptable for 1/5,000 digital topographic mapping. Therefore, we considered that further researches are needed on applicability of GCPs extracted from TerraSAR images for future alternative method.