지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2013.4
- 수록면
- 835 - 841 (7page)
이용수
초록· 키워드
오류제보하기
Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation.
In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task.
Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator’s intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, “resonant sizes”), when intensive losses of energy occurs. The authors proposed to use the length of stem’s fixture as an additional design parameter to avoid such cases.
So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM’s discrete mesh. The optimum length and dangerous “resonant lengths” have been found.
The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its “dynamical Pole”, i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short “beams” (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh’s functions of the 1<SUP>st</SUP> and 2<SUP>nd</SUP> kinds.
To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.
In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task.
Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator’s intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, “resonant sizes”), when intensive losses of energy occurs. The authors proposed to use the length of stem’s fixture as an additional design parameter to avoid such cases.
So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM’s discrete mesh. The optimum length and dangerous “resonant lengths” have been found.
The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its “dynamical Pole”, i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short “beams” (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh’s functions of the 1<SUP>st</SUP> and 2<SUP>nd</SUP> kinds.
To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.
목차
ABSTRACT
1. Introduction
2. Statment of Problem & Proposed Methods
3. Analytical Solutions
4. Numerical Experiments
5. Design Optimization
6. Natural Experiments
7. Conclusions
References
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
A Comparative Study on The Performance of GPGPU-Based Linear Iterative Solvers for Equations Occurring in CFD
Muthukuma
,
an Ramalingam
,
Sang-Wook Lee
한국전산유체공학회 학술대회논문집
2014
.10
Physical Activity Recognition for Mobile Devices Based on Time Domain Features with Periodic Calculation
Mamatov Fah
,
iddin
,
Min Gyu Song
외 4명
한국정보기술학회논문지
2011
.10
다공질 재료의 음향 성능 예측을 위한 물성 측정법 연구
이형래
,
김호용
,
전주현
외 3명
한국소음진동공학회논문집
2018
.04
방향성을 가진 회전체 소음의 청각계 인지 특성에 관한 연구
서강원
,
김의열
,
김성기
한국소음진동공학회 학술대회논문집
2012
.04
최근 본 자료
댓글(0)
0