지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.31 No.8
- 발행연도
- 2014.8
- 수록면
- 721 - 728 (8page)
이용수
초록· 키워드
오류제보하기
In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn’t use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of 350x350mm was changed from 50° to 80° and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.
목차
1. 서론
2. 시스템 구성
3. Ta값에 따른 가공 경로
4. 실험
5. 실험 결과
6. 결론
REFERENCES
참고문헌 (12)
참고문헌 신청
Dohyeon Kyeong / 2009 / Laser Edge Isolation for High-efficiency Crystalline Silicon Solar Cells / Journal of the Korean Physical Society 55(1):124~128
Shin, D. / 2010 / A FPCB Cutting Process using a Picosecond Laser / Journal of Laser Micro/Nanoeng 5(1):48~52
Kim, K. H. / 2010 / Laser Scanner Stage on the Fly Technique for High Precision/Ultra-Fast/Wide Area Fabrication / Proc. of KSME Spring Conference :31~32
Yoon, K. H. / 2010 / Scanner-Stage Synchronization Control Method for Laser Fabrication of Large Aera / Proc. of KSME Spring Conference :287~288
Kim, K. H. / 2010 / The Scanner-Stage on the Fly Technology for a Ultra Precision/Ultrafast/Wide Area Fabrication / Proc. of KSLP Spring Conference :44~46
Shin, D. / 2010 / A FPCB Cutting Process using a Picosecond Laser / Journal of Laser Micro/Nanoeng 5(1):48~52
Kim, K. H. / 2010 / Laser Scanner Stage on the Fly Technique for High Precision/Ultra-Fast/Wide Area Fabrication / Proc. of KSME Spring Conference :31~32
Yoon, K. H. / 2010 / Scanner-Stage Synchronization Control Method for Laser Fabrication of Large Aera / Proc. of KSME Spring Conference :287~288
Kim, K. H. / 2010 / The Scanner-Stage on the Fly Technology for a Ultra Precision/Ultrafast/Wide Area Fabrication / Proc. of KSLP Spring Conference :44~46
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-550-001611903