메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
전경아 (고려대학교) 이인복 (서울대학교) 임범순 (서울대학교) 이종찬 (고려대학교) 백승호 (서울대학교)
저널정보
대한치과재료학회 대한치과재료학회지 치과기재학회지 제40권 제1호
발행연도
2013.3
수록면
1 - 6 (6page)
DOI
10.14815/kjdm.2013.03.40.1.1

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The aim of present study was to investigate and compare the oscillation ampltude of experimental ultrasonic scaler tips made of following four different metal; copper(CU), bronze(BR), 316L stainless steel(316L) and conventional stainless steel(SS). These experimental metal tips were connected to the ultrasonic equipment that was set at 40% of full power, the oscillation amplitude of tips was measured using a piezoelectric sensor connected to an amplifier and an analogue-digital converter. The measurement was repeated under various loads from 109 to 60g. In general the oscillation amplitude of the CD and BR group was significantly lower than that of 316L and SS group(p<0.05). The CD and BR group showed a significant difference when the load was more than 50g(p<0.05). The 316L and SS groups showed no significant difference in all loads(p>0.05). And the oscillation amplitude was significantly increased in the all groups according to the increase of the load(p<0.05).

목차

ABSTRACT
서론
재료 및 방법
실험결과
고찰
결과
참고문헌

참고문헌 (22)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-510-001110647