본 논문은 무베어링 헬리콥터 주로터 시스템 설계를 위해 초기 단계인 헬리콥터 개념 설계에 대한 내용을 기술하였다. 헬리콥터 설계와 구성품 설계를 위한 과정 중 초기 개념설계 단계는 헬리콥터 전체적인 형상을 설정하는 매우 중요한 단계로 요구사항에 부합하는 헬리콥터 및 구성품의 초기 형상, 크기, 무게, 성능을 제시하게 되며, 이 후 제시된 설계 결과를 가지고 기본설계, 상세설계를 수행하게 된다. 본 논문에서는 무베어링 헬리콥터 주로터 시스템 설계를 위해 항우연에서 보유하고 있는 설계 툴인 HPDC를 사용하였으며, 설계된 초기 개념설계 과정과 결과를 기술하였다. 이렇게 도출된 설계 결과는 요구사양과 비슷한 중량의 무베어링 허브를 지닌 Kazan 社의 ANSAT 헬기와 비교하여 적절하게 설계되었음도 확인하였다.
This paper describes a initial conceptual design for the design of the helicopter bearingless main rotor hub system. The initial conceptual design stage is a very important step for the helicopter and its components. This step set up the helicopter overall shape and design results in this step are presented to meet the design requirements. Based on the results of the initial conceptual design of the helicopter and components to perform preliminary and detail design. In this paper, describes a design results of helicopter and components by using a HPDC helicopter design tool and the design results of bearingless main rotor hub system were compared with existing helicopter of similar to the design requirements.