정지궤도 위성이 발사되는 중에는 발사체의 부스터나 단분리, 페어링분리, 발사체-위성체 간 분리 뿐 아니라 위성 자체에서 태양전지판 전개, 안테나와 관측센서의 보호덮개 개방 시 폭발볼트를 사용함으로 인해 충격하중이 발생한다. 충격하중에 민감한 전장품과 센서들의 설계, 제작 및 검증을 위해서는 위성 개발 초기단계에서 충격환경을 예측하거나 해석할 수 있어야 한다. 위성체에 가해지는 충격하중에 대한 응답을 예측하기 위한 방법으로 충격시험, 이전 위성의 충격시험 결과를 사용한 추정법, 유한요소해석 등이 활용될 수 있다. 본 논문에서는 스펙트럴요소법이 소개되었으며 1 차원 스펙트럴요소 해석결과와 L-단면 형상 충격 시험 결과가 비교되었다.
During a GEO satellite is launched, the satellite is subjected to shock loads from the typical sequence of events for the launch missions which are booster or stage separation, fairing release, satellite-launcher separation. And also the satellite itself can make shock loads from solar array deployment, reflector antenna and optical cover opening by use of pyro bolts. Initial design phase of the satellite development, shock environment should be predicted or analyzed in order to design, manufacture and verification of electronics and sensors which are sensitive against shock loads. In order to satellite shock response prediction, shock test, shock estimation from the previous satellite shock test result and FEM analysis methods can be applied. In this paper, SEM(Spectral Element Method) was introduced and 1D SEM analysis results were compared with L-shape beam shock test results.