메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
조성경 (군산대학교) 성현종 (군산대학교) 이광형 (군산대학교) 김형주 (군산대학교)
저널정보
한국지반신소재학회 한국지반신소재학회 학술발표회 2013 한국토목섬유학회 가을 학술발표회
발행연도
2013.11
수록면
65 - 68 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the optimal shape of a custom-made polypropylene (PP) woven geotextile tube filled with landfill dredged sedment was investigated. An observation on the deformation behavior of the geotextile tube during filling and after dewatering was thoroughly conducted. A T-shaped inlet (patend application number: 10-2013-0090597) developed for this specific experiment was used to deliver the pumped dredged soil to fill the geotextile tube until tube height is equivalent to 50% it’s theoretical diameter. the changes in the gedtextile width and height measurement during and after slurry filling were constantly monitored and recorded. Measurements were conducted using special measuring staff on the outer shell of the geotextile tube. the effective tube height reduction at each measurement point on the geotextile tube ranges from 3,2% to 32% two days after the final slurry injection. In addition, geotextile strain varies depending on the amount of accumulated soil in the cross-section. Maximum strain occurs at the branch point with maximum cross-sectional area, however, the top and bottom geotextile sections shows minimal strain reading.

목차

SYNOPSIS
1. 서론
2. 실대형 토목섬유 튜브 퇴적실험
3. 실험 결과 및 분석
4. 결론 및 요약
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-530-003383886