메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jin-Soo Ko (Meeram I.F) Byung-Yun Kim (KCI Research Center) Sung-Woo Park (Samsung Engineering & Construction) Mun-Hwan Lee (Korea Institute of Construction Technology) Sung-Bok Lee (Korea National Housing)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.3 No.1
발행연도
2009.6
수록면
15 - 23 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Over about 30% of problems in construction is related to water-leaking, and the loss from this problem can incur as much as three times the cost of initial construction. Thus, water vapor pressure is known to be the primary cause of defective waterproofing. Accordingly, the theories on the relationship between water pressure and temperature as well as damp-proofing volume of concrete and the change in vapor pressure volume were reviewed and analyzed in this study by making test samples after spraying a dampness remover and applying waterproofing materials to the prepared test specimens. The result of measuring water vapor pressure with the surface temperature of the waterproofing (fluid-applied membrane) layer at the experimental temperature setting of about 10℃, which is the annual average temperature of Seoul, indicated that (1) the temperature of the fluid-applied membrane elevated to about 40℃, and the water vapor pressure generated from the fluid-applied membrane was about 0.03 N/㎟ when the surface temperature of the waterproofing layer was raised to about 80℃. (2) when the temperature of the fluid-applied membrane of the waterproofing layer was raised from 30℃ to 35℃, water vapor pressure of about 0.01 N/mm2was generated, and (3) when a thermal source was applied to the fluid-applied membrane (waterproofing) layer, the temperature increased from 35℃ to 40℃, and approximately 0.005 N/㎟ of water vapor pressure was generated.

목차

Abstract
1. Introduction
2. Theoretical review
3. Overview of experiment
4. Experimental method
5. Experimental result and analysis
6. Analyses
7. Conclusions
References

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-530-002770158