메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장인혁 (조선대학교) 김수경 (한국기계전기전자시험연구원) 한지훈 (한국기계전기전자시험연구) 이창훈 (한국기계전기전자시험연구원) 임홍우 (한국기계전기전자시험연구원)
저널정보
한국신뢰성학회 신뢰성응용연구 신뢰성응용연구 제13권 제2호
발행연도
2013.6
수록면
117 - 127 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, we studied the correlation between the activation energy(E<SUB>a</SUB>) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy(E<SUB>a</SUB>) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The T<SUB>j</SUB> of Conditions and target specifics expressed T<SUB>j1</SUB>, T<SUB>j2</SUB>, T<SUB>j3</SUB>. The activation energy (E<SUB>a</SUB>) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy (E<SUB>a</SUB>) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy(E<SUB>a</SUB>) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

목차

Abstract
1. 서론
2. 시험 설계
3. 구현 및 시험
4. 시험 결과
5. 결론
참고문헌

참고문헌 (7)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-320-003225207