지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
For the process design of incremental forming processes like ring rolling or stretch forging there is need for fast and accurate simulation techniques. For many applications it would be necessary to predict the microstructural evolution during the process. For this reason the FEM-software Larstran/Shape which is used for the plastomechanical simulation can be coupled with the microstructure simulation module Strucsim. This software uses phenomenological equations for the calculation of recrystallization (dynamic and static) and grain size evolution [7].
To accelerate the simulation a multi mesh method has been developed. This method uses an adapted simulation mesh with fine elements only in the locally limited contact and forming zone to achieve a reduction of the number of elements. Due to the relative movement of the tool and workpiece the adapted FE-mesh has to be remeshed regularly according to the position of the tool. To avoid loss of information caused by the use of coarse elements the multi mesh method uses a second storage mesh which represents the entire workpiece and which is discretized using only fine elements.
For the update of the storage mesh the displacement vectors and changes of scalar values like temperature can be interpolated. For the application of the multi mesh method to the microstructure simulation the update algorithm for the microstructure values has to be modified. The microstructure and plastomechanical simulation have to be uncoupled and the static recrystallization and grain growth outside the forming zone have to be calculated separately. Using the multi mesh method the simulation of incremental bulk metal forming processes including a microstructural simulation can be accelerated. The acceleration factor of the simulation compared to a simulation without adaptive meshing is dependent on the reduction of elements and nodes.
To accelerate the simulation a multi mesh method has been developed. This method uses an adapted simulation mesh with fine elements only in the locally limited contact and forming zone to achieve a reduction of the number of elements. Due to the relative movement of the tool and workpiece the adapted FE-mesh has to be remeshed regularly according to the position of the tool. To avoid loss of information caused by the use of coarse elements the multi mesh method uses a second storage mesh which represents the entire workpiece and which is discretized using only fine elements.
For the update of the storage mesh the displacement vectors and changes of scalar values like temperature can be interpolated. For the application of the multi mesh method to the microstructure simulation the update algorithm for the microstructure values has to be modified. The microstructure and plastomechanical simulation have to be uncoupled and the static recrystallization and grain growth outside the forming zone have to be calculated separately. Using the multi mesh method the simulation of incremental bulk metal forming processes including a microstructural simulation can be accelerated. The acceleration factor of the simulation compared to a simulation without adaptive meshing is dependent on the reduction of elements and nodes.
목차
Abstract
PHENOMENOLOGICAL MICROSTRUCTURE SIMULATION
FE-SIMULATION USING ADAPTED MESHES
APPLICATION OF THE MULTI MESH METHOD TO MICROSTRUCTURESIMULATION
EXAMPLE AND OUTLOOK
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Generation of Non-uniform Meshes for Finite-Difference Time-Domain Simulations
Journal of Electrical Engineering & Technology
2011 .01
-
웨이브릿 기반의 3차원 물체 LOD 표현
정보과학회논문지 : 시스템 및 이론
2002 .04
-
Wireless Mesh Network 환경에서 손실에 강한 Diversity Mesh Point의 설계
한국통신학회 학술대회논문집
2007 .07
-
소성 가공 공정 해석을 위한 2차원 사각 요소망 자동 생성
한국CDE학회 논문집
2009 .06
-
직접구조강도 평가를 위한 선체 국부구조 상세요소분할모델 자동생성
한국CDE학회 논문집
2017 .09
-
폭발현상 해석을 위한 적응적 요소망 생성
한국CDE학회 논문집
2013 .12
-
무선 Mesh Network 구성 알고리즘 연구
대한전자공학회 학술대회
2017 .11
-
무선 메쉬 네트워크에서 효율적인 경로 유지 방안
대한전자공학회 학술대회
2010 .11
-
Variable-node element families for mesh connection and adaptive mesh computation
Structural engineering and mechanics : An international journal
2012 .01
-
[생산기술부문] 사각형 유한요소의 격자 절단과 요소 유연화
한국자동차공학회 춘 추계 학술대회 논문집
1999 .05
-
Direct Construction of a Four-Dimensional Mesh Model from Three-Dimensional Object with Continuous Rigid Body Movement
한국CDE학회 국제학술발표 논문집
2013 .08
-
MESH 에 의한 열전달증진에 관한 연구 ( A Study on the Heat Transfer Enhancement by Mesh )
대한기계학회 논문집 B권
1998 .05
-
Adaptive Remeshing for Modified Solid Model Through Mesh Re-use
한국CDE학회 국제학술발표 논문집
2010 .08
-
얇은 두께의 3차원 형상에 경계층 요소 생성
대한기계학회 논문집 A권
2005 .05
-
효율적인 형상 최적 설계를 위한 Dynamic Mesh에 관한 연구
한국항공우주학회 학술발표회 초록집
2006 .04
-
Dynamically Adaptive Finite Element Mesh Generation Schemes
한국전산구조공학회논문집
2010 .01
-
Pose Normalization for CAD Meshes
한국CDE학회 국제학술발표 논문집
2010 .08
-
Wireless Mesh Network and its Applications
한국멀티미디어학회 국제학술대회
2008 .07
-
Mobility Management in Multi-Radio Multi-Channel Wireless Mesh Networks
한국통신학회논문지
2008 .03
-
Mesh Generation of Porous Metals from X-ray Computed Tomography Volume Data
한국CDE학회 국제학술발표 논문집
2013 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-003326918